Archive > EuroHarmony Main Forum
PMDG 738
EHM-1570 Bruce:
I had a similar problem where when I input certain Airports, I would get the error message "Error in line XXX", it was not cured by installing the latest AIRAC, I had to delete the existing NAV data and install the latest, it was apparently due to a corrupt file which was not overwritten. Hope this helps.
EHM-1539 Pierre:
I'm not sure it's the sid/star that's broken, maybe the wpNavFIX.txt file in navdata directory that is screwed up.
Anyway, Bruno, do the following, if it doesn't work, we'll be sure it's the PMDG that has a problem and not the navigation data, so we can search for a cause in your PMDG files :
In your FS folder, go to FMCWP folder, NAVDATA folder, and delete everything in it.
Still in your FS folder, go to PMDG folder, SIDSTARS folder, ant delete everything in it.
Then reinstall PIC-PMDG_0505 from navdata, and PMDG_Procedures_0505 from Terry Yingling.
If it's a navigation file problem it'll be fixed.
EHM-0948 Bruno:
Will do it now ...
Wait for more news ;) ... Thank you.
EHM-1570 Bruce:
Cyriel. The legs page must be showing, so to delete a waypoint in the PMDG FMC you first press the DEL button, Delete should now appear in the scratchpad area of the FMC, then you press the key next to the waypoint you want to delete, this will delete the waypoint, but you will now have A Route Discontinuity Showing in the flight plan, again press the delete button so that Delete appears in the scratchpad, then press the key next to the Route Discontinuity, this will remove the Route Discontinuity, the Execute light should now be illuminated, press Exec to enter the changes, job done. Also if you want to fly to a waypoint in your flight plan that is not the next waypoint in the plan, press the key next to the waypoint that you want to fly direct to, this waypoint will now appear in the scratchpad, now press the LK1 key at the top of your plan, this will put the waypoint from the scratch pad into this first location, again the EXEC button will illuminate, press the EXEC button, the aircraft will now fly direct to the new waypoint. Hope this sorts out your problems.
EHM-0948 Bruno:
Hi,
I uninstalled everything back and installed everything again. It runs fine now.
Bruce, I had that doubts too. Thank you for your explanation.
Thank you all for your help !!!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version