Archive > Technical discussions

Same Error as EHM-1714

<< < (2/8) > >>

EHM-1500 Jim:
Ta Bruno, must confess i usually select the flight first - obviously why i am having the trouble!!

EHM-0948 Bruno:
Hi Jim,

No problem ;) ..

We are always here to help you.

EHM-1150 Armando:
Hi everybody ;)

just a small clarification:

Jim is right when selecting the flight and after that the aircraft... that is the correct way, as only the aircrafts for the selected class/division will be shown.

But some aircrafts  can be flown in more than one division, and in that case we must choose the aircraft first and then the flight, like Bruno said, despite the message that appears.

I'll think of a solution for this, but for now we can live with it as it is ;).

Bye bye

Armando Chibante

EHM-1617 Iain:
Very nice piece of kit there, I have no problems at all - just a sugestion.

When using the RouteFinder button, how is the altitude defined? Also could the code be modified so that 'warn for restrictions' is turned on? Otherwise unrealsitic routes come out.

EHM-1150 Armando:
Hi Ian,

the route finder button uses the departure and arrival airports of the selected flight; no other parameters are sent to the routine that calculates the route such as altitude and level as it should be an input from the pilot; we will test the use of this feature and will see if it's worth adding more features.
I'll implement the warn for restrictions in the next correction.

Thank you for your comments.

Bye bye

Armando Chibante

Navigation

[0] Message Index

[#] Next page

[*] Previous page