Archive > Support

Small fault

(1/2) > >>

EHM-1500 Jim:
Guys, just done my first Pro-Pilot flight and have to say i think it is the best thing to hit this VA since the jet engine!! One small fault i spotted was that it said i had been at fault for not resetting my altimeter above 18000ft - i was flying the PMDG 737-800 and had reset the altimeter using the cockpit switch for standard (STD) in the centre of the altimeter selector and not using the B key board button - thus i had reset my altimeter but the software didn't detect it - not a big fault at all but i wanr to be a perfect pilot!! LOL and brilliant work all round guys, cheers, Jim

EHM-1366 Themis:
In fact you need to calibrate it to STD above 10000 in Europe and above 18000 in US. This should be taken into consideration when the problem is fixed ;)

EHM-1500 Jim:
Just realised i have done the whole flight on-line and didn't press the little pro-pilot tab in the flight logger and so don't think the flight will be valid although the PIREP has logged with my details and appears in the flights...d**n....guess i will be doing that one again then!!!

EHM-0948 Bruno:
Jim,

I use always the PMDG 737-800 and I don't get that fault. Are you sure ? haven't you made something incorrectly ?

Basically I set my altimeter some hundreds of meters before that time, or, if I am flying on IVAO, right after passing the transition altitude ...

Regards,

EHM-1500 Jim:
Yep Bruno, i reset it to STD as soon as i passed through 5000ft as per ATIS but i definately got a penalty message appear across the top of the screen??

Navigation

[0] Message Index

[#] Next page