Archive > Support

Can\'t log successfully (runtime error appears)

<< < (3/4) > >>

EHM-1730 Geoffrey:
Armando,

I've tried using the logger following your instructions last night. I managed to submit a PIREP successfully on one flight. :>

After that I tried another flight using propilot and the logger. However, upon landing I think I hit the runway too hard and i suppose the airplane was considered to have 'crashed'. I received a message in FS 02 that the logger ended logging at a particular time, but when I closed FS 02 to submit PIREP I saw the overflow error again. :{So the PIREP can't be submitted at all and it does not register my flight as a failed one.

That's all the testing that I did last night, shall try more propilot flights sometime soon and give more feedback.

Regards,

EHM-1730 Geoffrey:
Ah and also, I don't understand why my navigation lights usually black out soon after take off so I have to fly in a pitch black cockpit throughout the flight in those that take place in the evenings. Does it have to do with the aeroplane failure algorithm?

EHM-0948 Bruno:
EHM-1730, no. We don't change anything on the aircraft.

EHM-1670 Bill:

--- Quote ---Originally posted by EHM-1730
I don't understand why my navigation lights usually black out soon after take off so I have to fly in a pitch black cockpit throughout the flight
--- End quote ---

Just a thought - check the lighting in the Hardware tab of  Settings and ensure the slider is all the way to the right.

EHM-1617 Iain:
Check you are turning on the generators, otherwise you will lose all electrics about 10 mins after startup. There is no default shortcut key, assign one, I use Shift-K.

Navigation

[0] Message Index

[#] Next page

[*] Previous page