Archive > Technical discussions
Airbus A320-200
EHM-1744 Danny:
--- Quote ---Origineel gepost door baszw
When adding power monitor the engine data too see if the throttle conrols both engines or just adds power to the number one engine on the A322
If this is the case press: E and 1 and 2 to select both engines.
--- End quote ---
That was the problem!!
The right engine runs stationary and the left was speeding up. So it's not strange that the aircraft goes to the right side of the runway...
Thank you all for your help!!!!;)
EHM-0654 Murray:
Danny, if you have the paid for FSUIPC, go into the Hotkeys page and assign a shortcut to select all engines (I use Ctrl+Alt+E)... has saved my neck more than once.
EHM-1744 Danny:
--- Quote ---Origineel gepost door Murray Crane
Danny, if you have the paid for FSUIPC, go into the Hotkeys page and assign a shortcut to select all engines (I use Ctrl+Alt+E)... has saved my neck more than once.
--- End quote ---
No, I have the free version...
But can you tell me what the reason is when I fly at 28000 ft and speed 350 and the aircraft is stalling right up and the speed is dropping like a rock... I did nothing that causes problems....:[
EHM-1651 Christian:
Just glad to help out.
But sometimes it can be a mess getting fs to select both engines again particulary if you need to to so fast.
Then it newer works in time.
FSUIPC has saved me somtimes to.
It's probably an the weather in fs wich doesn't smothe the wind/weather effects an you ran into an strong tailwind wich made you airspeed drop below the stall speed....
FSUIPC also can fix this if ypu got the registred version
:P
EHM-1744 Danny:
--- Quote ---Origineel gepost door baszw
Just glad to help out.
But sometimes it can be a mess getting fs to select both engines again particulary if you need to to so fast.
Then it newer works in time.
FSUIPC has saved me somtimes to.
Just ask again if you have trouble on an issue
--- End quote ---
Please read text above...:[
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version