Archive > Screenshots Forum

Mad time at EGLL

<< < (2/3) > >>

EHM-1001 Robert:
You should modify your AFCAD file too. The planes should use 1 runway for landing and 1 for takeoffs. In EGLL its not so difficult, as only 2 runways operational.

EHM-0240 Joe:
I used to get this problem, but like Robert says, you should get the AFCAD program and edit the files. I did this and things now run much smoother. I made the two runways operatonal at EGLL which was ok. I also did it for EHAM, which can be a bit risky because sometimes planes are taking off in the path of aircraft on final approach. :o

EHM-1358 Tim:
Ive got the problem with the ATC sorted now by getting a new AFCAD file. And the are tons of planes.

EHM-1388 Tiberiu:
Here's a shot of an evening approach at Zurich - Kloten (LSZH):



Sorry for the labels, quality droped when I converted from bmp to jpg.

EHM-1388 Tiberiu:
And here's a pic of the a/c waiting to take-off at noon...



And yes, that is an AI Concorde ;D. You can find it on AvSim.com under the name concorde_ais.zip

Navigation

[0] Message Index

[#] Next page

[*] Previous page