Archive > Technical discussions

Panel A330

(1/2) > >>

EHM-1745 Ferry:
Hi all,

After having a problem with the A330 (missing a gau.file) i want to use a different panel from the fleetdownloads.
The first problem i didnt solve so...:|
its a very nice panel by Ken Mitchell for the A330.
If i want to place it in the A330 the panel is visible,but the gauges are not there.
im not so good with this so maybe someone can help me out here (step by step:o) how i can make it works.

Best regards,

EHM-1617 Iain:
FlightSim.com Guide
Read it very carefully, following the instructions all the way ;) That will get you up and running.

EHM-1001 Robert:
Hi Ferry !

Well, the Ken Mitchell panel is the simple folder type panel. What it means ?

For first, unzip it to a temporary location. It will contain several folders, like docs, gauges, panel and sound. The files in these folders should manually copy to the correct folder and you are ready...not to mention these all are written inside the README.txt ;)

So:

Docs folder goes to FS2004\Aircraft\ehm_a330v2\Panel\
Files in Gauges go to FS2004\Gauges
Files in Panel go to FS2004\Aircraft\ehm_a330v2\Panel overwrite mode !
Files in Sound go to FS2004\Sound.

And you are ready ;)

EHM-1745 Ferry:
Hi,

I tried to do that,but when i want to copy panel i dont get the message overwrite.
So, i get the error when i load the aircraft "file: gauges\a330. gau. them fs9 is freezed.
I had this problem before, but i didnt need the plane than,but now i can fly the class 6 planes.
You did explain it to me very clear (looks easy) but i am not good with this:o

EHM-1745 Ferry:
Hi,

Ok, i now have the panel with all views, but the gauges are not there,i copied gauges in the main gauges folder of fs9.
There must be a stupid thing that i dont understand.
Flying without instruments will be bringing the crash ratio up :]

Navigation

[0] Message Index

[#] Next page