Archive > Technical discussions
PSS A-333
EHM-1001 Robert:
If I remember well, those are in 1 package, and the panel is red from outside the aircraft library. There is another "blind" aircraft something like PSS-pro and the sounds and panels are stored there. Maybe your A330 was simply aliased to the A340 panel ?
What I do not like in both Project Opensky and PSS versions is the A330 is not bow ahead. If you see real world pictures it is gently bowing ahead on the ground and it gives her a special looking. But in FS the model is too much parallel with the ground.
EHM-1703 Philip:
Hi Robert, all my standard A330-300's have the correct panel and I have put the EHM textures in the the same A330 folder and adjusted the Air file as instructed, for some reason, this one shows up with the A340 panel :%
For now I have ovecome this by copying just the textures in to the house A330-300 RR and flying with that. I will look in to this problem at a later date.
EHM-1001 Robert:
Well you can check these 2 points:
1. your Aircraft.cfg [flightsim.EHM] section contains:
panel= (nothing)
2. Your panel.cfg contains:
alias=pssab-pro\panel.330
3. The above directory exists in your aircraft folder.
Or any equivalent combination, that leads your panel path to pssab-pro\panel.330 :)
Then it should work ;)
EHM-1703 Philip:
Thanks Robert,
Checked and correct! Still got 4 engines on the EICAS. This is very weird. I will keep investigating.
Cheers,
EHM-1592 Niels:
Hi all,
Something comepletely different, but when i fly the PSS-model on PP, i get penalized for switching off the landinglights below 10000 ft. The model does this automatically by retracting the landinggear, does anybody know how to avoid this, without retracting above 10000ft?
Niels
EHM1592
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version