Archive > Questions and Answers

How does the thing work?

<< < (2/2)

EHM-1001 Robert:
Hi folks,

there is a better order. I always run FS first, and place the plane on the correct airport, apron/gate, and shut down everything on it.

Then I start the Logger, and carefully select the plane and flight, because in an older version I could reposition the plane in FS with a sudden bad click...it may exist now too, I do not know. So carefully select the airplane and flight, and then click on  ProPilot button, and your log will waiting for the engine start to start recording ;)

If you somehow missed it, or the logger recoded an engine shutdown, then click on the Start New Log. But this time do not forget to select the airplane and flight once again !

EHM-E4S:
Thanks for your help!

I sorted out my problem by doing the flight allover again! Luckily, It was a short flight.

By the way, Roger, you made alot of sense. Alot more sense then the language air traffic control speaks lol.

EHM-1671 Ben:
Glad I could help!

EHM-2089 Vincent:
Good hints ... usually I too start my FS first and then Flight Logger. Make sure that my engines are off and am in the same parking bay that I select in my FS selection. Its good to learn tricks ... its helps you in case of emergency :] (Read crash :P)

Navigation

[0] Message Index

[*] Previous page