Archive > Technical discussions

3 Problems - Q2

(1/2) > >>

EHM-1909 Chris:
Ok, my second problem is this:

The EH Airbus A330-300 installation went ahead without a hitch, however, when I select the aircraft from the menu and click ok I get this message:

"Flight Simulator was unable to load some aircraft or software. You can continue using Flight Simulator but this aircraft or software will be disabled.

File: GAUGES\A330.GAU"

FS then stops responding after displaying the message. I get the same with the Dassault Falcon and I think one or two others.

I tried removing the offending file and replacing it with a renamed .GAU file from the standard FS 737-400 and it loads the aircraft without a problem, however the aircraft then only has one gauge working and the others are dark.

Any ideas??

Thank you.5

EHM-1703 Philip:
Hi Chris,

There is an old post about a similar problem, have a read through this and see if they help.

http://www.fly-euroharmony.com/forum/viewthread.php?tid=2159

EHM-1909 Chris:
Thanks Phil, I'll have a look at it.

EHM-1909 Chris:
Unfortunately I'm still having no luck here. I've followed all of the instructions on the posts you gave me the link for and although I don't get the error message on selecting the 330 now I don't have any gauges in the panel. Any other ideas?

EHM-1703 Philip:
OK, one solution in this post was to register FSUIPC, I know thats a cost option, (but there are a lot of other reasons for registering FSUIPC) here is the thread:

http://www.fly-euroharmony.com/forum/viewthread.php?tid=1893

Sorry thats the only other answer I can help you with.

Good luck mate.

Navigation

[0] Message Index

[#] Next page