Archive > Technical discussions
To the wishlist
EHM-0001 Gergely:
The only thing I can think of is that your plane is refueled automatically if you stop near a fuel station on an airport; so the fuel quantity at shutdown will be greater than the one at startup.
EHM-0240 Joe:
I was having exactly the same problem with the fuel when I tried it out a couple of times today.
This seems to be the cause of the problem: It happens when you begin your flight with the engines already running, and the flight logger already working.
The solution I found was to start the flight, without the flight logger open. Then switch off the engines. Then open the flight logger, set up the flight logger, then switch the engines back on to start the logger.
It may also be possible to resolve this problem by changing your default flight so that flights begin with the engines already switched off, but I can't be bothered to go about changing my default flight. :)
EHM-0588 Paul:
What I do is start the logger and then Flightsimulator. When it starts with the engines on I shut the engines down and then press the New Log button in the logger.
Then start the engines and the logger works fine. :P
EHM-1077 Emanuele:
Wouldn't be simplier to save a default
flight with the engine off, so that every
time you start FS the engines are off?
Ciao ciao!
Manu
EHM-1150 Armando:
Thank you all for your comments, they are a good contribution.
I'm out of my for the weekend, so I can't test the fuel 0 at startup in this moment; if you start the logger with engines on, just click Stop Log, then New Log buttons and then start engines normally.
0962, please set the screen resolution of your pc to 1024X768 and your FS resolution to 800X600; I think that will solve both problems; just call if you need more assistance.
Bye bye
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version