Archive > Screenshots Forum
SOON AVAILABLE - Boeing 737-800
EHM-0962 Zhen Yi:
The runway could be particularly short so he could have needed all that flap to get enough lift to takeoff
Then again he may have done it to emphasize on the blue slants on the flaps! :]
EHM-1358 Tim:
--- Quote ---Originally posted by EHM-0962
The runway could be particularly short so he could have needed all that flap to get enough lift to takeoff
Then again he may have done it to emphasize on the blue slants on the flaps! :]
--- End quote ---
With the flaps so far down. That would cause more drag than lift. I have a little graph some were about it. Flaps a about 10* would be just right on average.
EHM-0962 Zhen Yi:
yup i guess you're right
EHM-0813 Guillermo:
--- Quote ---Originally posted by blood13
A little off-topic here, but why do you use so much flaps on take-off??? :o
--- End quote ---
Runway 01 at EHGG is veeeery short.. at least too short to take off with maximum t/o weight with only 5-10 degrees of flaps :p
Btw the panel is almost finished.. it's not perfect but it's the best I could do. I just came back from London so I'll post a pic tomorrow.
EHM-0361 Karsten:
--- Quote ---
Originally posted by Gizmo2k4:
it works well for you? I had some problems with it lately, but this new one works perfectly. That's why it will be FS2004 only
--- End quote ---
I don’t think that the FS2004 is the only one that are having problems with that plane. I think it’s one of those planes that works for some people, and don’t work for others. I use a FS2002 PRO and let me tell you that my flightsim hates that plane. After flying some time, maybe 5 min or an hour my flightsim freezes up and I have to restart the flightsim or in some cases the whole computer. It only happens when I use that plane or any other plane based one the same model. So that’s one plane that I’m not going to use, that for sure. :@:@
Just some info, if by chance I'm not the one FS2002 use that are having problems with the B738
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version