Archive > Technical discussions

Need help with Dorner 328 panel

(1/1)

EHM-1971 Mike:
I have installed Ken Mitchell's panel for the Dornier 328. After following the directions in the readme, the panel is there but no gauges. Can someone hold my hand and walk me through step by step. I am a computer dummy and have no idea what I am doing.

EHM-1001 Robert:
Hi 1971 !

This is a common question , do not worry :)

Inside the ZIP file of the package, you will find 2 folders. If you unzip the package to a temporary place, you will get those folders. The PANEL folder always goes to the desired aircraft's own folder.

1. Copy all files from the unzipped Panel folder to ..\FS2004\Aircraft\ehm_d328\Panel. By this you copied all the panel background and gauge configuration to the correct place.

2. Copy all files (und subfolders) from the unzipped Gauges folder to ..\FS2004\Gauges. By this you copied all the gauges to the correct place. After this you MUST see the complete panel.

Good luck, Robert ;)

EHM-1971 Mike:
Robert, thank you for your help. I now have the panel installed, working, and loving it.

Thanks again,
Mike

Navigation

[0] Message Index