Archive > Technical discussions

Possible bugs, comments on the new fleet

<< < (9/16) > >>

EHM-1570 Bruce:
I have just downloaded the new fleet, and there is an error in the E170 aircraft.cfg file stopping the panel from being loaded. If you open the aircraft.cfg file, in the first section on the line panel= there is a 3 following the = sign this has to be removed and the file saved and the panel will now display.

EHM-1570 Bruce:
There is also an error in the A333 aircraft.cfg file where the panel= line has vc following the = sign, but there is no vc panel so the vc has to be removed in order to display the panel correctly

EHM-1956 Mikael:
Hello pilotfrends  i hawe some bugs to report aswell the saab 2000 is bumping upp and down when im taxi and on the runway and the autotrothle is not working corect i cant get it upp to sped.but anyway nice work with the new fleet.

EHM-1465 Dominic:
Bruce,

I think it's a typo in the A333 .cfg - the vc should be after "model=" rather than after "panel=" so if you swap the vc between those two you get the right panel and the virtual cockpit!

EHM-1001 Robert:
Thank you Bruce, it gives a little light to the darkness. The problem is that the airplanes are placed in development phase at me, and when I collect the files for installation, some bugs can remain in them.

OK gentlemen, as Bruce said, we have 3 small bugs so far: in the B767, A330, and E170. The A330 Virtual Cockpit issue was fixed (at least it works at me) All these 3 packages are now uploaded to the site.

About the SAAB bouncing, there must be something different in our systems. I found very strange behaviors at the A320, which was invisible at the betatesters.  Now I corrected it, but the change is still invisible in their FS. Now I can only think about FSUIPC.dll It can change a lot of things in FS depending if you have registered or unregistered copy.

As I wrote in the installer, the AutoThrottle does not work on the SAAB because FS cannot control the torque of the engines.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version