Archive > Technical discussions

Flight logger problem

(1/2) > >>

EHM-1838 Andrew:
Hello
I have just flown only my second flight after a long layoff from Euroharmony using the Flogger and at the end of the flight i could see that it had not recorded the details correctly ie the flight according to flog was only one and a half minutes long ,accars detail appeared to be correct (have saved details)Is there anything i can do?This is annoying as i have enjoyed getting back to EuroH.
cheers Andy

EHM-0654 Murray:
Bouncy take-off Andy? ;D

It's something that is mooted for FLogger v3.0.9, but as far as previous versions go, you will have to manually file a PIREP or re-fly the flight and take off cleanly.

EHM-1838 Andrew:
Thanks Murray
Bouncy take-off HARRumph!:8
Will try again
cheers Andy

EHM-1838 Andrew:
Oh Dear!
Second flight EGLL EHAM same problem FLogger not recorded flight ,and i took great care on take off and all seemed well.Never had this problem with previous FLOG.
cheers Andy

EHM-1703 Philip:
Andy,

I am sure you have probably tried this, but as we have not seen this problem before, is there any other addons that you may have installed recently? Did it happen at EGLL both times? (Maybe you could look for a newer AFCAD file for Heathrow) Is it with the same plane both times?

Basically I guess we need to eliminate whatever we can from the problem solving process so if you could try a flight from different airports with different planes and see if the same situation occurs. The only other problem I can think of is look at your FSUIPC version, make sure it is up to date, also are you running software along side the flight logger that may interfere, possibly FSP or something although I have never heard of a module or addon that uses FSUIPC cause this sort of problem.

Good luck, keep us posted.

Navigation

[0] Message Index

[#] Next page