Archive > EuroHarmony Main Forum
A380 panel
EHM-1570 Bruce:
I have carried out several approaches in the new A380 and the nose is pitched too high on approach, I have modified my aircraft.cfg file and the view and AOA is just about perfect. The change to the aircraft.cfg file is as follows: open the cfg file and scroll down to the [flaps.0] and change the lift_scalar from 0.1 to read 0.8 , then save the file. I have tried the approaches several times, and I could see the runway all the way down to touchdown.
EHM-1759 Ricardo:
Sorry mates but this panel has some bugs:
1. I cannot see lateral views;
2. Two rotative buttons do not allow mouse scrolling to the positive values: HDG, CRS and Altitude.
Is possible to make the somes gauges appear bigger on clicking them? For example for the fuel screen? It is important because there are some values too small and they are importants for the flight, like the weights etc...
Thanks.
Keep the good job.
EHM-1821 Javier:
1) sorry Ricardo, don't get what you meant by lateral views
2) yea, i realised that too, i think it might be possible to replace them with the knobs from Ken Mitchell's panel
3) i'll go have a shot at making the screen bigger by clicking it ;D
EHM-1759 Ricardo:
Hi Javier, thanks for your quick answer.
For lateral views I mean, when you are inside cockpit, if you turn your head to the left, right or back side, you only see a black screen, there are no windows :[
Thanks a lot once more :)
EHM-1821 Javier:
thats strange, my cockpit views showed up just fine, i think its the file name for the side view image is different from the file name
could you check that the bold part in for example the front left view:
[Fixed Window30]
file=Forward_Left.bmp
position=7
visible=0
ident=30
render_3d_window=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
is the same as your file name for that view? im guessing that its different as i couldnt send the files for the views along with the email to Robert and that might have caused the problem
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version