Archive > Technical discussions

Concorde

<< < (3/3)

EHM-0240 Joe:
I dont know about this panel but some panels, the Mach and IAS setting are shown in the same display and switching the Mach or IAS button on will change it to the other setting.

Although as you seem to have the Mach button switched on in your pic, and a speed setting of like 997kts, maybe this isnt the problem.

EHM-0695 Scott:
Yes Joe. The 997 speed is shown because Tom had FS set to fly with True Airspeed rather than Indicated Airspeed.

Regardless of panel, it is the gauge that is the culprit. The ol' FS2000 concorde gauges have a separate display window for both IAS and Mach.

Navigation

[0] Message Index

[*] Previous page