Community Discussion > Flight Operations

10th Anniversary Fly-in - sign up here!

<< < (7/8) > >>

EHM-2381 Ted:
Ok here are my planned routes-bear in mind I'm flying the ATR72-500 so you may need to adjust as you see fit:

Leg 1 LSZH-LSZB

If the winds stay the same it will be a RWY 10 departure via WIL2D then as directed from the WIL VOR or via the WIL2M STAR into Bern (if no ATC) with a planned altitude of FL120.

If you don't have the updated AFCAD for LSZH you will need a different runway+SID as RWY 10 is the newer crosswind runway not included in original FSX.

Leg 2 LSZB-EGLC

BADEP BALIR KUBOM LXI SDI CVT CTL ABY BNE DET with a DET arrival to EGLC. ALKI3D is the proper STAR but I chose a NAVAID route for this leg. Easy enough to program in the FMS. I am doing this leg at FL220. The Bern departure is pretty much RWY heading and left turn to BADEP as the SID's are meh for this airfield.

Hope that helps!

EHM-2155 Mariano:
I need help, as usual
When connecting to IVAO, I don't get any Beech liveries to select from the MTL
I checked the MTL and there aren't any more Beech models to download.



Is the Beech 1900 no longer supported or something?
Otherwise I'll pick an airbus a380 and look completely ridiculous...

EHM-1997 Alexander:
it's not beech it's raytheon b190

EHM-2155 Mariano:
Yeah as soon as I posted that I remembered to go to the MTL installer and filter all euroharmony aircraft... then I saw it was B190 and not BE19
Raytheon my butt -.-

Thanks alex anyway

EHM-2381 Ted:
Leg 1 complete. No VATSIM Swiss radar but ATC cover over France and into the UK looks good for leg 2.

See ya on the ground soon!

Happy Brithday EuroHarmony  ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page