Archive > Main Forum

Ooooooppppps

<< < (10/11) > >>

EHM-1627 Chris:
no i can find the plane alrite on the plane list...the problem comes when selecting the MTL...there is no plane that is of the same number...ie nothing that says B747 (although this is there...couldn't remember what was missing).if what i have just said is unclear then say and i will take some screen shots of what i get.

EHM-1365 Benjamin:
Ok, you will have to select a different plane in the top section, so if you are using a prop plane, just select B350, and same in the bottom for example.

This will hopefully get fixed soon.....Gergely?

EHM-0654 Murray:

--- Quote ---Originally posted by C_Blyth
no i can find the plane alrite on the plane list...the problem comes when selecting the MTL...there is no plane that is of the same number...ie nothing that says B747 (although this is there...couldn't remember what was missing).if what i have just said is unclear then say and i will take some screen shots of what i get.
--- End quote ---

Like Ben says, pick a plane of equivalent size from the MTL list, and indicate in your FP notes what you are really flying (this just makes it easier for other pilots, ATC always "see" what you are really flying)

So, when I fly the IVAO VFR WT in the Piaggio P180 Avanti, I use the Beech KingAir MTL model (about the right size and cruise speed, and the KA is also a twin prop)

EHM-1627 Chris:
The Problem is that i don't have that plane listed in the second section

this is what i get



and the problem i have is not knowing what to put into the bottom section

Can I put the D328...is looking at things is it quite similar

EHM-1617 Iain:
Send your Flight Plan 1st, then the top box will be filled in automatically. If there is a correct model in the MTL library, then that will automatically appear in the bottom box. Otherwise, just select from the bottom list the acft that is most like what you are actually flying.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version