Archive > Technical discussions

Flogger problems

<< < (2/3) > >>

EHM-1838 Andrew:
Thanks Phil
Actually i like the POSKY aircraft(Freeware of course) i have loads of there most recent 737/700s .There will come a time when i feel its time to start moving up to things even more realistic like perhaps PMDG aircraft,but i believe they require quite a steep learning curve.Actually two of the panels for the new Eurocargo fleet(146 and A310) look quite brain stretching and will require my printer to be dusted of so i c an study the (LONG)manuals in detail.
cheers Andy
PS on my next flogger flight i will check after takeoff to see if flogger is still logging.

EHM-2110 Matt:
Andrew,

Defineately could be the problem.  I often find FLogger quite tempremental about when it decides it should start logging and the like so i end up filing manually alot of the time!

And i know its off topic but it gives me a penalty for releasing park brakes without engines on yet the pushback sequence in the level-d 767 demands it... any ideas?

EHM-0654 Murray:
Matt,

Reasonably sure you've got that back to front - the only engine/brakes penalty in the current FLogger is starting engines without parking brakes set (Bruno/Avat, right or wrong?)

EHM-2110 Matt:
Sorry Murray thats what i mean...

The ground crew in the level-d makes you release brakes for pushback and then start-up while pushing back and brakes off so get penalty.  I know i could wait until p/b is complete and brakes are back on but i like to try and get away quickly!

EHM-2143 Tommi:
Hi im new at Euroharmony and its my first VA ever.
Its nice to be with you and i hate to have my first post here conserning problem, but ill hope i get over them fast.

So i flew my first flight in Propilot and took light EGJJ-EGLL, first time i didnt choose the flight from flight table and after flight i noticed it didnt log anything :]
But second time i did it correct and at the end of flight it stopped the log.
Everything was correct. Then i choose to save pirep before submitting, just to be sure that if i get it wrong there is saved log at least... well pressed "save pirep", then it gave some error (what i dont remember it was", pressed ok with the error and the whole program shut down. I started it again and the log wasnt there anymore, looked at save folder and nothing there either :s

Ill try again soon but would like to know if anyone has had same problem, thanks.

Navigation

[0] Message Index

[#] Next page

[*] Previous page