Archive > EuroHarmony Main Forum

A380 panel

<< < (5/7) > >>

EHM-1759 Ricardo:
I have already discovered the problem. The forward_left images etc... don't have the same name like is written in the panel file.

My forward_left image is named: a321_left45.bmp

Now, it is working properly :)

Robert, please check this because I think I am not the only one with this problem.

Thanks :)

EHM-0641 Rico:
same here, all the window values have another name in the panel.cfg then the images stored in the panel folder... how do I change that ?

EHM-1759 Ricardo:
Hi Rico

Change your textures name:

A321_left135.bmp    ===>>> rear_left
A321_left90.bmp      ===>>> left
A321_left45.bmp      ===>>> Forward_left
A321_right45.bmp    ===>>> forward_right
A321_right90.bmp    ===>>> right
A321_right135.bmp  ===>>> rear_right
A321_right180.bmp  ===>>> rear

Select your aircraft again... and it's done!!! :)

EHM-1001 Robert:
Well,

I fixed a lot on the airplane. Fixed the Fuel config so it looks fine on the Fuel display, fixed the side views, fixed the knobs, and added a bit more flaps power :P Not as much as Rico adviced, because it would let her takeoff too early ;)

If somebody would have the talent and time to repaint the background, we could have a very own and really nice A380 panel ;)

EHM-1671 Ben:

--- Quote ---Originally posted by EHM-1001 Robert
Well,

I fixed a lot on the airplane. Fixed the Fuel config so it looks fine on the Fuel display, fixed the side views, fixed the knobs, and added a bit more flaps power :P Not as much as Rico adviced, because it would let her takeoff too early ;)

If somebody would have the talent and time to repaint the background, we could have a very own and really nice A380 panel ;)
--- End quote ---


Does that mean that it's been put onto the A380 and we have to download and install it again?

Navigation

[0] Message Index

[#] Next page

[*] Previous page