« previous next »
Pages: [1]

Author Topic: Bae-146 Cargo Animation problem  (Read 3492 times)

EHM-2194 Vlad

  • Guest
Bae-146 Cargo Animation problem
« on: December 01, 2007, 11:38:27 pm »
Hey guys I keep running into a problem. Before my flight, whenever im parked and i open the doors I can never get the cargo animation to work. Does anyone have this same problem? If so how do i fix it?
Logged

EHM-1821 Javier

  • Guest
Bae-146 Cargo Animation problem
« Reply #1 on: December 02, 2007, 05:06:46 am »
Hi there neon,

I'm not familiar with the BAe 146 but maybe your parking brakes were not on? or you would have to shut down engines first. if i remember correctly, the animations have seperate commands like wings fold or extend tailhook(?)

hope this helps!
Logged

Offline EHM-1001 Robert

  • Global Moderator
  • Intergalactic!!
  • **
  • Posts: 3,790
  • Karma: 0
Bae-146 Cargo Animation problem
« Reply #2 on: December 02, 2007, 11:02:19 am »
Well, there is a sequence for the animation. It will only disappear, when you close doors, and only after start engines.

After the flight it will only appear if you shut down the engines, those are completely stopped, and only after you open the doors.
Logged

AMD X4-955 3.2GHz / Gigabyte 770T / 4 GB DDR / Gigabyte GTS450 1GB DDR
Samsung 226BW@1680x1050 / WinXP.3 / FS9.1 / FSX.1 / Saitek Cyborg 3DGold

EHM-2180 Mugur

  • Guest
Bae-146 Cargo Animation problem
« Reply #3 on: December 02, 2007, 03:24:44 pm »
how do i open the cargo door?
Logged

Offline EHM-1465 Dominic

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 3,529
  • Karma: 10
  • VA Management
Bae-146 Cargo Animation problem
« Reply #4 on: December 02, 2007, 03:47:07 pm »
Mugur,

The panel manual is a really good read that will help you understand the panel and aircraft functions fully ;)

The following quote (very slightly edited) from the FAQ's in the manual gives the answer to your question:

How could I open the second door or the cargo doors?

Opening the second aircraft entry or the cargo doors is possible with the standard key command. However there are a few things that are important for this. The cargo doors can only be opened if the fuel cocks in the pedestal panel are open, the batteries are switched on and at least the DC pump of the hydraulic system is on (brake pressure must be available). After this the key command works.

The standard key command is Shift + E + 2 by the way ;D

If you enjoy flying this aircraft I'd really recommend reading through the manual - although it's long it gives you a wonderful understanding of this plane :P
Logged
Dom Mahon // EHM-1465
VA Management

EHM-1328 Willem

  • Guest
Bae-146 Cargo Animation problem
« Reply #5 on: December 02, 2007, 03:53:01 pm »
If you dont have a key you can't open doors ...


or try   SHIFT-E  followed by 2 or 3 works on most airplanes.
Logged

EHM-2194 Vlad

  • Guest
Bae-146 Cargo Animation problem
« Reply #6 on: December 02, 2007, 04:06:22 pm »
Thanks guys, I managed to solve the problem. The problem was that before I opened the doors I would turn off hydraulics and all other systems. Cheers guys :)
Logged
Pages: [1]
« previous next »
 

anything