Flogger

[EHM-2131 Bruce]

Hello all. After my PC crash  l have been replacing my Flogger with no luck l get the following reports."cannot intialize data bindings" and Runtime error 9, any suggestions to cure this
Regards Bruce T

[EHM-0948 Bruno]

Hi Bruce,

I think if you search the forum (Technical Discussions) you'll find some actions that you can do to solve that out.

Regards,

[EHM-1671 Ben]

Hi Bruce,

If you're running Windows Vista (which I expect you are), here is the solution for the runtime error 9:

http://www.fly-euroharmony.com/forum/viewthread.php?tid=4013#pid38342

Hope this helps

[EHM-2131 Bruce]

HI Ben and Bruno l am running MS XP. l have looked at the forum and found some of the files. but l cannot find REGEUR32.exe l have done a search on my computer but cannot find it, thanks for the help Bruce EHM 2131

[EHM-2131 Bruce]

Hi, have just downloaded the flogger on another computer but still get the same result "no bindings and runtime 9" any more sugestions. missing my pro pilot!!!! regards Bruce 2131

[EHM-0948 Bruno]

Hi,

Try to search on the internet for that file: the REGEUR32.exe.

Also, if someone has that file and can post a link to it Bruce will thank you.

Regards,

[EHM-1001 Robert]

Hi folks,

in the original topic it was "regsvr32.exe" Here is my FILE. It is hot from the Windows\System32 folder. Although it is Hungarian... maybe not the best, you can try it out at least

[EHM-1759 Ricardo]

Hi Bruce, here you have mine for Windows XP (English Version):

http://web.tagus.ist.utl.pt/~ricardo.placido/regsvr32.rar

Regards

[EHM-2131 Bruce]

THanks for the help. l am not very good with computers, were do you put the file/ how do l get the windows system32, sorry for being no good with this subject, Regards Bruce EHM 2131

[EHM-1001 Robert]

Hello Bruce !

If you have Windows XP it is probably installed on your C: drive. Inside the Windows folder there is a system folder called System32, so alltogether the path is probably "C:\Windows\System32" you should copy the regsvr32.exe file there. Then run it as described in the earlier attached thread

[EHM-2131 Bruce]

Hello Robert Thanks for the info  l have found the file and put the regsvr32 into it but still not working,  regards Bruce 2131

[EHM-2131 Bruce]

Hello all. thanks for the info have now finally got flogger working again, went back into the forum and re-read them, the reason i could not get it to work was i was using "/" instead of "\"when typing  the DLL:$  l have gone to the bottom of the class!!! see you all on Pro pilot soon     Bruce 2131