Author Topic: A340-500  (Read 3082 times)

Offline EHM-2383 Ian

  • Sub-orbital
  • ******
  • Posts: 332
  • Karma: 0
A340-500
« on: April 23, 2009, 07:53:52 pm »
Has anyone, by any chance, experienced a problem with the Simubuild A340-500? I have noticed that it seems to judder along when taxiing rather than roll along smoothly. In fact, on my last flight - when I was just trying the aircraft out before committing to ProPilot - the judder increased to a bounce just after landing and this eventually, before I could brake to a halt, caused the front wheels to hit the ground so hard that they collapsed and I crashed! It may just be my system (I use FS9) but if anyone has found this problem and solved it I would be grateful to hear of the solution as I like this bird. The aircraft seems to behave very well in every other respect.

Ian

Offline EHM-1465 Dominic

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 3,529
  • Karma: 10
  • VA Management
A340-500
« Reply #1 on: April 23, 2009, 08:31:58 pm »
Ian,

Sometimes this is an issue with the ground surface which can be solved by changing it in AFCAD2 but id it happens generally despite the road surface then it is likely to be a flight dynamics issue and I'm no expert on that I'm afriad...

Anybody else got any thoughts..?
Dom Mahon // EHM-1465
VA Management

 

anything