EuroHarmony Community Forums
Community Discussion => Flight Operations => Topic started by: EHM-1882 Gian on June 11, 2011, 06:59:54 pm
-
Hello, I have been using Flight logger 4.1.3 until late afternoon to day and while attempting to fly a pp flight already locked, I got the message that my version of Flight logger is out of date and been directed to the forum where I have seen taht apparently there is a new version now 4.1.4...Hovever how should I load it? Has anybody experienced the same issue? Thks for your great and unvaluable help :)
Gian
EHM-1882
-
Use the link on the front page of the main site, dpownload, unzip and run the installer. You can direct the installation to where your current install is located.
EDIT - the installer doesn't create a shortcut (this version). You need to go to where you installed (defaults to C:\Program Files (x86)\Euroharmony\Flight Logger 4 on x64 and C:\Program Files\Euroharmony\Flight Logger 4 on 32 bit). Right click on the Flogger.exe and click on create shortcut. If on vista or 7 and you installed to program files this will then promt to ask if you would like this on the desktop, click yes. Otherwise it will place the shortcut in the folder and you can then move the shortcut to your desktop (or wherever else).
-
works ok
-
Hi,
I have just installed and tried to run the new version of Flogger and have received an error message, preventing it from running. I have attached the message in a document, can you help?
Thanks
Jonathan
-
Hi,
I have just installed and tried to run the new version of Flogger and have received an error message, preventing it from running. I have attached the message in a document, can you help?
Thanks
Jonathan
Please supply your operating system and version (32/64bit) Looks like you have the wrong sqlite installed. You can unzip your last flogger download and use the correct sqlite dll from there. Strange because I believe it has been successfully tested under both 32 and 64 bit os. Maybe you're missing a dependancy for the check to execute correctly.
-
Hi,
Sorry, I am running Vista 32 Bit. Unfortunately I no longer have the previous version of the flogger so can't get at a different version of Sqlite.
-
http://www.fly-euroharmony.com/forum/index.php?action=media;sa=media;in=593;dl (http://www.fly-euroharmony.com/forum/index.php?action=media;sa=media;in=593;dl)
-
Alexander,
Yes, that worked fine, Flogger now executes correctly.
Many thanks
Jonathan
-
Thks Alexander, It works again!
Gian
EHM-1882
-
I've got a small problem with the new Flogger.
It starts up fine I can aso login my flight. It also collects all data during flight.
But I can not see myself on ACARS. And when the flight is finished I can not send the Pirep.
The report Flight Pirep shows "not submitted"
But when I try to send it, I get the message: "Flight has already been submitted." ???
At the moment I just fill out the Pirep by hand. Because the Flogger shows me all the data I need for that. ;)
btw using FSX, windows 7 64 bit
Carel
-
Ignore my last message.
I donĀ“t know what I did, or how I did it. But flogger is working again. :)
-
Excellent news ;D
-
Help with Flight Logger,
I just upgraded to Windows 7 Home 64 Bit, installed flight logger but wont detect FSX :( any helo/advice appreciated
Kevin
-
make sure FSUIPC is installed in FSX. Link on homepage
Make sure fligth sim is running with aircraft at gate/ on runway in sim before running flogger.
-
thank you
all is sorted and working now :)
-
my Flight logger 4 is not working. at start says that exist an error and only let me sending it to microsoft.
I download fl 3 and is the same.Can anybody tell whats happen.
Regards
Rocha
-
Flight Logger 3 has been retired and will not work. Only Flight Logger 4 can be used.
Can I confirm that you have read and followed the instructions in the manual with regard to installing dependencies such as .net framework?
Then also what Operating system you are using and the exact error that occurs and steps to reproduce.
-
my flight logger 4 was working until last week. everything was working.
now i can not start, because the program oblige me to inform tre error to microsoft.
seeing the errors is this
AppName: flightlogger.exe AppVer: 0.0.0.1 AppStamp:4e0ee428
ModName: mscorwks.dll ModVer: 2.0.50727.3625 ModStamp:4e154c98
fDebug: 0 Offset: 0009cfd0
Rocha
-
So what did you change on your computer from last week?
You could backup the Documents/Flogger 4 folder and delete it, then run flogger as first run.
-
uff everything is working. I go back my last flight date and starts working.
I do not know what happened download or other program.
thank you alexander
rocha