EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => EuroHarmony Main Forum => Topic started by: EHM-1639 Richard on May 15, 2005, 08:16:24 pm

Title: Beech 1900D Atitude Indicator
Post by: EHM-1639 Richard on May 15, 2005, 08:16:24 pm

Hi, I'm new at EHM (about to embark on my first flight!) and I've encountered a problem. I installed my Beech 1900D and the panel (I kept the existing one in the folder too). The problem is, my AI won't display - its just a blank column. It's nothing to do with the avionics either. Any suggestions? SHould I use a different aircrafts AI or download a seperate one somehow?

Thanks!

EHM-UPXT (Richard Ayerton)

Title: Beech 1900D Atitude Indicator
Post by: EHM-1617 Iain on May 15, 2005, 09:02:06 pm

hmm. my b1990d panel is fine

Title: Beech 1900D Atitude Indicator
Post by: EHM-1001 Robert on May 16, 2005, 11:15:12 am

Hi Richard!

Alternatively, you could try any of these Beech panels:

ftp://63.217.28.218/1panels/b1900pnl.zip

ftp://63.217.28.218/1panels/b1900d_p.zip

It sounds very odd, that some gauges are not working properly. Maybe it is a system problem. What are your system specs?

Title: Beech 1900D Atitude Indicator
Post by: EHM-1627 Chris on May 16, 2005, 03:01:57 pm

well i couldn't get on with the EHM panels so i copied the Learjet 45 panel.  this is soo much easier to use!!!

Title: Beech 1900D Atitude Indicator
Post by: EHM-1639 Richard on May 16, 2005, 09:38:42 pm

Nice one guys! Cheers.

Title: Beech 1900D Atitude Indicator
Post by: EHM-0948 Bruno on May 17, 2005, 10:15:51 am

Good luck on your first flight Richard.

and welcome to EuroHarmony.

Regards,