EuroHarmony Community Forums

Archive => Other Topics => Old Forum => Flight Simulation => Topic started by: EHM-1034 Kris on April 10, 2004, 12:37:42 pm

Title: Radio Error
Post by: EHM-1034 Kris on April 10, 2004, 12:37:42 pm

I did a flight from LKBT to LKKV this morning and something very strange happened. I was at 8.000ft. when I had to change the frequency to 123.0. The usual ATC window popped up with the option to tune to 123.0. I pushed the 1-key on my keyboard, but nothing happened, I changed the frequency myself on the radio, and again nothing happened. I reloaded the flight and the same problem occured, I then started the whole flight as a new one (meaning not reset flight), but once again the same problem occured.
The only non-standard FS-thingy in the neighbourhood of LKBT was an AFCAD, so to check if that was the problem I restored the default lay-out of the airport and tried again, sorry that I have to repeat this again, nothing happened.
So if anyone knows what this problem is or even better, how to fix it, I would appreciate your help.

Title: Radio Error
Post by: EHM-0813 Guillermo on April 10, 2004, 01:53:48 pm

Hmm, sounds very weird... Has this problem occurred with other aircraft as well? If so you might want wanna try to re-install FS. It fixes most of the major problems.

Title: Radio Error
Post by: EHM-0471 Peter on April 10, 2004, 11:18:19 pm

Well, I had somedays ago similar problem with ATC and nothing helped until I decided to reload FS9. After this cure the problem was solveddefinitively. What was the reason for my troubles...God knows!
So try this advice.

Peter

Title: Radio Error
Post by: EHM-1034 Kris on April 11, 2004, 04:58:31 am

I tried the same flight again today, and nothing happened (as in the error didn't occur again). I guess this is just one of the FS-mysteries.

Title: Radio Error
Post by: EHM-1034 Kris on April 12, 2004, 07:59:38 am

I found the cause of the error. I had to change to freq 120.230 (the APP of LKNA). But in FS you can't change the second digit after the '.' in anything else then 5 or 0. So you have to change the APP frequency(with AFCAD) of LKNA to 125.250, and everything runs smoothly again.

Title: Radio Error
Post by: EHM-0962 Zhen Yi on April 12, 2004, 08:58:18 am

ah.......that makes it an already known problem with fs..........i've got it with fs2002 too

Title: Radio Error
Post by: EHM-0641 Rico on April 18, 2004, 11:19:01 am

Quote

Originally posted by EHM-0962
ah.......that makes it an already known problem with fs..........i've got it with fs2002 too