EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1627 Chris on July 05, 2005, 08:10:57 pm
-
I recently tried to fly a cargo flight using the BAe 146QC, but when i pushed back i noticed that the cargo loaders ect were still connected to the plane...this was very strange. just wonderin if there was a way of closing the cargo doors, and hence making them disapear!!!
Also i canot wait to get the new flight logger. i tried to fly the same flight using the other class 4 cargo plane, and then on finals i went to open flaps using the button on the joystick, but suddenly the aircraft engines shutdown (due to not re-programing the joystick in the new fs install) landed all sucessful and then found out flight logger had crashed. luckily i knew what time i had started, taken off and finished, and then re taxied to the runway to work out a landing time. all very annoying.
-
I don't know about that plane particularly, but in many addons to operate additional doors / stairs you have to activate the wings folding or the arrestor hook (check your key assignment, try F9 or F10).
It might be written in the plan readme file too :)
-
ok thanks Pierre, will check it out later.
i think it will be the same as all the other aircraft
-
i have had a look, and there is nothing like this. has anyone else flown this plane and experianced the same problem?
-
I have taken some screen shots to show people what i mean
(http://img30.echo.cx/img30/2484/scr2005jul60038up.th.jpg) (http://img30.echo.cx/my.php?image=scr2005jul60038up.jpg)
(http://img150.echo.cx/img150/285/scr2005jul60022sd.th.jpg) (http://img150.echo.cx/my.php?image=scr2005jul60022sd.jpg)
-
has anyone else flown this plane and experianced the same problem?
Hi,
http://www.euroharmony.com/~forum/viewthread.php?tid=1003
;)
-
oh ok, thanks ben
-
The Bae's cargo door works fine with me(FS9)...After the fix package.
To close the door, first i start engines and after SHIFT + F, and when i switch to the outside view, the cargo is inside the aircraft and the engines are running, ready to go....
But after take off the aircraft don't obbey to my controls.
Hope this helps you
-
yeah...that was the problem...i hadn't downloaded the fix patch