EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1281 Cyriel on April 15, 2004, 03:50:57 pm

Title: closing cargo door on the BAE146QC
Post by: EHM-1281 Cyriel on April 15, 2004, 03:50:57 pm

How can I close the cargo door on the BAE 146QC from the Eurocargo division?
I tried <CTRL>+E and then keys 1 through 4 but this does not work.
I looks kind of silly flying with the doors open. Not to mention the condition the cargo will arrive in;)

Title: closing cargo door on the BAE146QC
Post by: EHM-0588 Paul on April 15, 2004, 05:48:53 pm

I have the same problem,  its smees to use some A.I.S - Animated Inbuilt Scenery.

I am working on finding a solution.

Title: closing cargo door on the BAE146QC
Post by: EHM-1077 Emanuele on April 15, 2004, 06:29:58 pm

Wasn't it Alt-E?

Manu

Title: closing cargo door on the BAE146QC
Post by: EHM-0744 Alex on April 15, 2004, 06:51:30 pm

It is Alt-E for FS2004 as far as I know... I know that on the Training Beech Baron it works that way.

Cheers,

Alex;)

Title: closing cargo door on the BAE146QC
Post by: EHM-0588 Paul on April 15, 2004, 07:31:32 pm

For FS2004 it is a bit more complicated than that, it has some inbuild dynamic scenery that requires that the engine is shut down and pressing some keys.

It did not work for me, i replaced some files and now its ok. I will get it into a zip file with some instruction later today, because I have to go now.

EDIT:
I now have the door and the A.I.S. working. My solution is in the zip file below. Read the read_me.txt file before installing.

bae146 FS2004 cargo fix (http://httpd.chello.nl/p.soetens/BAE146edit.zip)

Title: closing cargo door on the BAE146QC
Post by: EHM-1281 Cyriel on April 17, 2004, 10:06:16 am

I tried to instal the fix. I can open and close the main exit. But I still can not close the cargo door. Am I doing something wrong?

Title: closing cargo door on the BAE146QC
Post by: EHM-0588 Paul on April 17, 2004, 10:31:58 am

Did you press shift-e and than 2 ?

Title: closing cargo door on the BAE146QC
Post by: EHM-1281 Cyriel on April 17, 2004, 06:22:12 pm

I did press shift-e followed by 2.  I will check again if I installed the fix correctly.

Title: closing cargo door on the BAE146QC
Post by: EHM-1077 Emanuele on April 17, 2004, 06:24:13 pm

Is there any chance the plane master
switch/batteries were not ON?
Maybe it simply need power to close
the doors...

Ciao ciao!

Manu

Title: closing cargo door on the BAE146QC
Post by: EHM-1459 Jonny on August 22, 2004, 07:11:10 pm

On the EHM A320 in FS2002 I was delayed in Zurich because as I found out, the left engine has to be running to close the cargo and baggage doors.

Title: closing cargo door on the BAE146QC
Post by: EHM-0240 Joe on August 23, 2004, 12:17:19 am

Sometimes these things can be Shift + T or Shift + W. Those functions are supposed to be wings folding and tailhook extending, but I find they sometimes operate doors.

Title: closing cargo door on the BAE146QC
Post by: EHM-1001 Robert on August 23, 2004, 08:07:22 pm

In FS2002 Shift+E+1 or  2 is the magic hotkey, although its right that you need power for these operations. On the CRJ for example, you cannot extend your flaps either without power. Its realistic, because the hydraulic pressure produced by the help of engines or APU, on the ground.

Ctrl+E is automatic engine start hotkey.