EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-0948 Bruno on August 30, 2005, 02:33:14 am
-
Dear pilots,
Place your flight logger problems here.
Any doubts, ask them here too.
Thanks,
-
No problems Bruno, just wanted to say what a great job has been done - it looks awesome!! I especially like the link to the route finder service - brilliant idea and one i personally will use all the time - updates fine for me which the old one never did - great job guys!! Jim
-
Sorry, spotted first problem.......when you do a tour flight the training aircraft don't appear in the aircraft choice list eg cessna, so i cant use the logger for tours???
-
Hi,
Jim we will take a look.
Basically you need to FIRST select the aircraft (without any filters on the Timetable) and then the mission.
That should be :
Click on the aircraft.
Click on the flight mission that you want. The filter will make disappear your aircraft but it is already selected. It will say "Aircraft doesnt match flight" but you can make the flight and send the pirep.
-
I just done 2 flights with tim..and it worked a treat;D
-
Ta Bruno, must confess i usually select the flight first - obviously why i am having the trouble!!
-
Hi Jim,
No problem ;) ..
We are always here to help you.
-
Hi everybody ;)
just a small clarification:
Jim is right when selecting the flight and after that the aircraft... that is the correct way, as only the aircrafts for the selected class/division will be shown.
But some aircrafts can be flown in more than one division, and in that case we must choose the aircraft first and then the flight, like Bruno said, despite the message that appears.
I'll think of a solution for this, but for now we can live with it as it is ;).
Bye bye
Armando Chibante
-
Very nice piece of kit there, I have no problems at all - just a sugestion.
When using the RouteFinder button, how is the altitude defined? Also could the code be modified so that 'warn for restrictions' is turned on? Otherwise unrealsitic routes come out.
-
Hi Ian,
the route finder button uses the departure and arrival airports of the selected flight; no other parameters are sent to the routine that calculates the route such as altitude and level as it should be an input from the pilot; we will test the use of this feature and will see if it's worth adding more features.
I'll implement the warn for restrictions in the next correction.
Thank you for your comments.
Bye bye
Armando Chibante
-
Thanks for the rapid reply!
-
Hi!
I'm a new pilot at EuroHarmony and i have installed the Flight logger but when i try to run it i keep having the same error from Microsoft Data Grid Control saying: "Cannot initialize data bindings" and then i get another error saying Run Time Error '9': Subscript out of range and then the program crashes...
What am i doing wrong? :$
Best regards,
João Resendes - Azores Spotters
-
Hmm that brings back memories, that second error, from the old version. Can't help you though, the new version fixed it for me.
-
use regsvr32 to Re-register msbind.dll and msstdfmt.dll. That should do the trick. If you need more detailed procedure for this let me know.
-
Hi, maybe try and re-install the program...but during installation, turn off your firewall.....it may be blocking it:%
-
Hi,
I've done what Razza said but it didn't work :[
Cyriel, can you explain me how to do that?
Thanks,
-
Hi Everyone!
This new Logger looks and works fine!
Only one thing is disturb me: on Preferences menu I can't push the "Read Airports" button. Is it works only offline or I need to reinstall the all stuff?
(and what this feature brings up for me?)
Thanks
-
First, you need to uninstall the previous version and completely install this new one.
This feature will be able for you to double click on the flight that you want to make, and then choose the gate to start. Flight Logger will load your airplane on that gate automatically on the flight simulator.
-
Originally posted by EHM-1714
Hi!
I'm a new pilot at EuroHarmony and i have installed the Flight logger but when i try to run it i keep having the same error from Microsoft Data Grid Control saying: "Cannot initialize data bindings" and then i get another error saying Run Time Error '9': Subscript out of range and then the program crashes...
What am i doing wrong? :$
Best regards,
João Resendes - Azores Spotters
I have installed ythe flight logger onto a machine that i have that does not have a flight sim (That is sitting in the middle of my living room...MEGA internet problems...AHHH AOL) and i have the same problem as this!!!
So when i by a really long network cable to run to my hub that is upstairs...and will install it onto there, and see if i get the same problems...this machine that it runs on is not very good, and has been sitting in a cupboard for about 3 years!!!
-
Rite ok...works on my actual machine...
...although i do have a sugestion...for the divs there is green circles that illuminate when clicked...is this possible to put on the class buttons?
-
I do not know if it was ever mentioned, but after I log a flight, land and send the PIREP to EHM, why does not it execute a New Log command automatically ?
Thanks, Robert.
-
to reregister msbind do the following:
goto start, run.
type:
regsvr32.exe "D:\Program Files\EuroHarmony\EuroHarmony Flight Logger\MSBIND.DLL"
You need to replace the path to the location where you actualy installed the program. When all is ok it will pop up a box telling registration of the dll was succesfull. This should solve the subscript out of range problem.
I have another problem myself when pressing the update button. It will tell me run-time error' 2147887(80040e21)': Multiple-step operation errors. Check each status value.
Anyone?
-
I get a crash when I click the "Save ACARS" button - Run-time error -2147024893 (80070003) The system cannot find the path specified.
I did the install to the default location (C:\Program Files\EuroHarmony\EuroHarmony Flight Logger)
EDIT: Oops, just noticed that the ACARS path in the preferences was wrong (from a previous install that had other problems)
I'll do a short test flight to see if the Logger still crashes when saving ACARS.
FURTHER EDIT: OK, forget that "error", just me being an idiot.
-
Originally posted by cyriel
to reregister msbind do the following:
goto start, run.
type:
regsvr32.exe "D:\Program Files\EuroHarmony\EuroHarmony Flight Logger\MSBIND.DLL"
You need to replace the path to the location where you actualy installed the program. When all is ok it will pop up a box telling registration of the dll was succesfull. This should solve the subscript out of range problem.
I have another problem myself when pressing the update button. It will tell me run-time error' 2147887(80040e21)': Multiple-step operation errors. Check each status value.
Anyone?
Thanks... but it didn't work!
João Resendes
-
Originally posted by SirRoberto
I do not know if it was ever mentioned, but after I log a flight, land and send the PIREP to EHM, why does not it execute a New Log command automatically ?
Some of us also like to submit the PiRep to IVAO too ;)
-
Just a couple of observations. In the IVAO PIREP, could it be made to submit the TAS cruise not the IAS? The formula is not very hard:
KIAS cruise + ( (Cruise altitude/1000) x (KIAS cruise/50) ) = KTAS cruise.
Strictly Speaking, you should factor in the OAT as well as that has an effect, but it is close enough.
And also there should be a field for the Alternate Airport so that that is correct also.
-
Hi Iain,
suggestions received; I'll see that on the next release.
Thank you
Armando Chibante
-
I have the same error as EHM-1714 . You know the whole data binding error. And I Also tryed what Cyriel said. Didn't work for me either. I have unistalled and reinstalled. Re register those two dll's and even gone so are as to do all those things after I shutdown Microsoft antispyware, disable antivirus, and firwall stuff. What else is there to try. I have windows xp home sp2 with the latest java enviroment.
-
what version is it that you have the probelms with??
if it is 2.6.36 then try the newer 2.6.39, if 2.6.39 then read the fixes in http://www.fly-euroharmony.com/forum/viewthread.php?tid=1612
-
C_Blyth
Nothing In those other post helped Theres no where to download the .36 version. And the post that mentions this error has a link to other posts, But that link is broken. page can't be displayed:]
-
C_Blyth
Nothing In those other post helped Theres no where to download the .36 version. And the post that mentions this error has a link to other posts, But that link is broken. page can't be displayed
-
Hi,
The version 36 was fully replaced by the 39 version.
Chris was correct when say that, but some weeks ago we developped a full new working 39 version.
So, please, go to the suggested downloads and download/install the 2.6.39 version.
Regards,
-
Yeah .39 version is what I downloaded
-
yes but now there is a new version for the new web address.
what i really suggest it to get into the add/remove programs (accessable through your control pannel) and remove all traces of the euroharmony flight logger and then download the LATEST flight logger (CLICK HERE TO DOWNLOAD LATEST FLIGHT LOGGER (http://www.fly-euroharmony.com/flightlogger/2.6.39/Full_Setup_EHMFLLogger.exe)) and try that, if that does not work, then remove it and wait untill the brand new version of flight logger comes out with the pro pilot intergration, there is a chance that this may work.
if not then we can deal with that problem then, it just seems silly trying to sort out the problem that only you are having when the new version is on it's way VERY VERY SOON!!! (3 days i think)
-
I'm still having problems, and this is with the latest version!
When I start up the Logger, I put my password in and after a couple of seconds I get a 'Run-time error 94: Invalid use of null' screen.
I have been asking around about this for a few days now, and nothing's helped me. I have even cleared up the drive it's installed it by deleting unused software. I have uninstalled, downloaded and reinstalled it numerous times. I'm getting quite anxious because I'm starting the EuroHarmony US Airmail event tomorrow, so I need to get this sorted! HELP! :(
-
Hi,
Calm down Ben. We are trying to solve it as soon as possible.
I was analysing your situation, and I think that the problem is related with your Hub. You belong to KATL right ?
Please, change to a different hub and test it again.
Tell me the result here please.
Regards,