EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1744 Danny on October 30, 2005, 07:58:34 am

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 07:58:34 am

I want to make a flight with the A320-200, but when I'm taxiing the aircraft goes the other way while stearing.
The same problem I have with the Boeing 737-800.

Does anybody knows what can be the problem here?

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 10:59:11 am

Check if you could have applied reverse axis on your joystick/yoke

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 11:01:46 am

Maybe a stupid question.... But how do I do that??
I have a Microsoft Sidewinder Precission 2 joystick.:|

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 11:35:20 am

Go to settings then assignment, select joystick axes and then if the boxes under reversed is checked uncheck them.....

Title: Airbus A320-200
Post by: EHM-1328 Willem on October 30, 2005, 11:38:17 am

In FS  via ALT - Options - Controls - Assignments

then  joystick axis,   (maybe also joystick type)

in the list  Rudder Axes   Z-as  set  reverse to True.

Regards Willem, EHM1328


BTW do you no how many stupid questions there are, if you try to count these questions you're really stupid :]

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 11:38:39 am

Quote

Origineel gepost door baszw
Go to settings then assignment, select joystick axes and then if the boxes under reversed is checked uncheck them.....

No, they are not checked....
Is it possible that the aircrafts are not good?

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 11:44:32 am

TRy then waht Willem said, but this may only apply on the aircrafts having the problems. Or try to reinstall the aircraft

Good luck and nice flights

Title: Airbus A320-200
Post by: EHM-1281 Cyriel on October 30, 2005, 11:53:46 am

I have had the same problem with my joystick (also a ms sidewinder). The problem was my handle was not properly centered. Try moving the handle to the left or right more. calibrating it might also help.

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 11:58:28 am

Quote

Origineel gepost door cyriel
I have had the same problem with my joystick (also a ms sidewinder). The problem was my handle was not properly centered. Try moving the handle to the left or right more. calibrating it might also help.

I already calibrate the joystick, but with no luck!
When I open the gas of the aircraft the aircraft goes to the right side of the runway. When I try to stear to the left to get the aircraft on the runway it doesn't help...

BTW....this problem comes with the A320-200. The Boeing 737-800 and other aircrafts worked perfectly!

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 12:10:11 pm

When adding power monitor the engine data too see if the throttle conrols both engines or just adds power to the number one engine on the A322

If this is the case press: E and 1 and 2 to select both engines.

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 12:58:50 pm

Quote

Origineel gepost door baszw
When adding power monitor the engine data too see if the throttle conrols both engines or just adds power to the number one engine on the A322

If this is the case press: E and 1 and 2 to select both engines.

That was the problem!!
The right engine runs stationary and the left was speeding up. So it's not strange that the aircraft goes to the right side of the runway...

Thank you all for your help!!!!;)

Title: Airbus A320-200
Post by: EHM-0654 Murray on October 30, 2005, 01:07:26 pm

Danny, if you have the paid for FSUIPC, go into the Hotkeys page and assign a shortcut to select all engines (I use Ctrl+Alt+E)... has saved my neck more than once.

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 01:11:53 pm

Quote

Origineel gepost door Murray Crane
Danny, if you have the paid for FSUIPC, go into the Hotkeys page and assign a shortcut to select all engines (I use Ctrl+Alt+E)... has saved my neck more than once.

No, I have the free version...
But can you tell me what the reason is when I fly at 28000 ft and speed 350 and the aircraft is stalling right up and the speed is dropping like a rock... I did nothing that causes problems....:[

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 01:14:26 pm

Just glad to help out.
But sometimes it can be a mess getting fs to select both engines again particulary if you need to to so fast.
Then it newer works in time.
FSUIPC has saved me somtimes to.

It's probably an the weather in fs wich doesn't smothe the wind/weather effects an you ran into an strong tailwind wich made you airspeed drop below the stall speed....
FSUIPC also can fix this if ypu got the registred version
:P

Title: Airbus A320-200
Post by: EHM-1744 Danny on October 30, 2005, 01:16:58 pm

Quote

Origineel gepost door baszw
Just glad to help out.
But sometimes it can be a mess getting fs to select both engines again particulary if you need to to so fast.
Then it newer works in time.
FSUIPC has saved me somtimes to.

Just ask again if you have trouble on an issue

Please read text above...:[

Title: Airbus A320-200
Post by: EHM-1651 Christian on October 30, 2005, 01:25:19 pm

Quote

Originally posted by baszw
Just glad to help out.
But sometimes it can be a mess getting fs to select both engines again particulary if you need to to so fast.
Then it newer works in time.
FSUIPC has saved me somtimes to.

It's probably an the weather in fs wich doesn't smothe the wind/weather effects an you ran into an strong tailwind wich made you airspeed drop below the stall speed....
FSUIPC also can fix this if ypu got the registred version
:P

Just posted this before your last post :P