EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1744 Danny on November 08, 2005, 01:12:55 pm

Title: Problem running A330-300
Post by: EHM-1744 Danny on November 08, 2005, 01:12:55 pm

I have installed the Airbus A330-300 in FS9.
But when I select the aircraft and click on Fly now, I get the following error:

Flightsimulator was unable to load some aircraft or software. You can continue using flightsimulator, but this aircraft or software will be disabled.

File: GAUGES/A330.GAU

How can I make this aircraft running in FS9?

Title: Problem running A330-300
Post by: EHM-1670 Bill on November 08, 2005, 02:39:49 pm

Try putting A330.GAU=1 under the Old Modules section of FS9.cfg.

It may work. In the meantime what is the date of your A330.gau file. I have one dated 15/11/2003 which seems to work fine. I can arrange to get it to you through yousendit.com where you can download it (it's over 4MB) if that will help. Just PM me your email address.

Title: Problem running A330-300
Post by: EHM-1745 Ferry on November 20, 2005, 09:16:25 pm

Hi Bill,

I have the same problem with the a330, and i cant fix it.
Maybe you can send me that file?
:>

Title: Problem running A330-300
Post by: EHM-1745 Ferry on November 20, 2005, 09:18:35 pm

Hi Bill,

Or you can explain me how i get in old modules?

Title: Problem running A330-300
Post by: EHM-1001 Robert on November 20, 2005, 09:24:40 pm

If you open FS9.cfg, there should be a section somewhere with a header:

[OldModules]

If not, create that inside the file, and add the given line under it, then save the cfg. I am sorry to say, that I do not know if it works or not, because I stand absolutely clueless at this problem.

FS9.cfg is somewhere under C:\Documents and settings\***USER***\Application data\Microsoft\FS9

Title: Problem running A330-300
Post by: EHM-1745 Ferry on November 20, 2005, 09:47:07 pm

Hi,

Ok, i did what you have told me, and make a file in my fs9.cfg.
But i get the same error again.
Maybe i have to fly the 767 instead, and not showing of in a nice airbus:8
I'll keep trying.
Thank you for responding so soon

Title: Problem running A330-300
Post by: EHM-1670 Bill on November 21, 2005, 08:13:37 am

I sent the gauge - did you not get it? You would have received an email from yousendit.com giving a link to download it from.

I have revived the link - you can get the gauge from here
  http://s43.yousendit.com/d.aspx?id=36SVFA7KTQZFY1YPIOWGRCZKR3

Title: Problem running A330-300
Post by: EHM-1745 Ferry on November 26, 2005, 10:02:31 am

Ok, thanks for the file:)

Maybe you can explain to me were i put the file into:%

i am not so good with that stuff

Title: Problem running A330-300
Post by: EHM-1744 Danny on November 26, 2005, 12:09:05 pm

Quote

Origineel gepost door Ferry
Ok, thanks for the file:)

Maybe you can explain to me were i put the file into:%

i am not so good with that stuff

I think you have to put it in the Gauge directory in FS9. Or maybe in the gauge-dir in the aircraft folder.

Title: Problem running A330-300
Post by: EHM-1651 Christian on November 26, 2005, 02:27:12 pm

I was also having the sameproblem with the A333 but after registering FSUIPC it worked fine made no changes to filelocations or anything....