EuroHarmony Community Forums

Archive => Other Topics => Old Forum => Screenshots Forum => Topic started by: EHM-1358 Tim on April 30, 2004, 06:27:43 pm

Title: Mad time at EGLL
Post by: EHM-1358 Tim on April 30, 2004, 06:27:43 pm

Well I was trying out all the new Project AI stuff I got at EGLL and its was really mad.

(http://img9.imageshack.us/img9/6558/eglllandingmad.gif)
This was a pic of the approch. There was alot more before that that had to go around and these were the first back fighting for the first landing.:o Only the first one landed and the other two had to go around.

But that was not the worst, all the planes that luckly got to land, ended up in a massive que up woth all the planes wanting to take of.
Just to say...that Dash 8 thats there had been there for about 20 mins:o.

(http://img9.imageshack.us/img9/5425/egllmadtraffic.gif)

I think they would have been stuck there all night.:]

Its just that same old problem when it comes to AI planes :@

Oh and before all that happend, nothing happend :]

Title: Mad time at EGLL
Post by: EHM-0813 Guillermo on April 30, 2004, 06:37:36 pm

wow those planes on final are very close to eachother :] stupid FS atc

Title: Mad time at EGLL
Post by: EHM-1358 Tim on April 30, 2004, 06:39:22 pm

Yeah very true!:o

Title: Mad time at EGLL
Post by: EHM-1343 Jonathan on May 02, 2004, 07:13:42 pm

I think I spotted 2 737's. Whats the other. my guess would be an a310. the other being the last one

Title: Mad time at EGLL
Post by: EHM-0744 Alex on May 02, 2004, 08:37:01 pm

I havent seen EGLL yet... Strange when I think about it, havent been to EHAM either.

Title: Mad time at EGLL
Post by: EHM-1001 Robert on May 02, 2004, 08:46:12 pm

You should modify your AFCAD file too. The planes should use 1 runway for landing and 1 for takeoffs. In EGLL its not so difficult, as only 2 runways operational.

Title: Mad time at EGLL
Post by: EHM-0240 Joe on May 03, 2004, 12:45:46 am

I used to get this problem, but like Robert says, you should get the AFCAD program and edit the files. I did this and things now run much smoother. I made the two runways operatonal at EGLL which was ok. I also did it for EHAM, which can be a bit risky because sometimes planes are taking off in the path of aircraft on final approach. :o

Title: Mad time at EGLL
Post by: EHM-1358 Tim on May 03, 2004, 05:59:16 pm

Ive got the problem with the ATC sorted now by getting a new AFCAD file. And the are tons of planes.

Title: Mad time at EGLL
Post by: EHM-1388 Tiberiu on May 11, 2004, 11:06:04 am

Here's a shot of an evening approach at Zurich - Kloten (LSZH):

(http://www.fspics.as.ro/fsscr098.jpg)

Sorry for the labels, quality droped when I converted from bmp to jpg.

Title: Mad time at EGLL
Post by: EHM-1388 Tiberiu on May 11, 2004, 11:15:25 am

And here's a pic of the a/c waiting to take-off at noon...

(http://www.fspics.as.ro/fsscr127.jpg)

And yes, that is an AI Concorde ;D. You can find it on AvSim.com under the name concorde_ais.zip

Title: Mad time at EGLL
Post by: EHM-0962 Zhen Yi on May 11, 2004, 02:22:46 pm

Nuts! i wonder how you all stand having so much traffic :]

Title: Mad time at EGLL
Post by: EHM-1388 Tiberiu on May 11, 2004, 02:41:37 pm

Oh, by the way, I used AI Speed (available on Avsim I think) to modify taxi speeds... otherwise those planes would have been there until the time the should have returned :]