EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1386 Fredrik on May 05, 2004, 08:06:59 pm

Title: Problems with class 2 aircrafts
Post by: EHM-1386 Fredrik on May 05, 2004, 08:06:59 pm

Hi

I have problems with all class 2 aircrafts. Anyone else have same problems? The panels is "over eachother" and on one aircraft I cant fint the symbols you need to press to open map/GPS panel/kneeboard etc.

I have FS2004.

/Fredrik

Title: Problems with class 2 aircrafts
Post by: EHM-1358 Tim on May 05, 2004, 09:57:04 pm

Well Ive got FS2002, but I didnt have any problems. Sorry cant help you there.

Title: Problems with class 2 aircrafts
Post by: EHM-1388 Tiberiu on May 06, 2004, 03:11:37 pm

The only class 2 a/c that is not compatible with FS2004 is Do-328.
Try pressing Shift+1, Shift+2, Shift+3, etc until you have the needed panels visible.

Title: Problems with class 2 aircrafts
Post by: EHM-0962 Zhen Yi on May 06, 2004, 03:15:38 pm

Some panels do not have the buttons put in them so you'll have to use the Shift+number option. This applies for both versions of FS

What do you mean by the panels are over each other?

Title: Problems with class 2 aircrafts
Post by: EHM-1386 Fredrik on May 08, 2004, 01:30:27 pm

Thanks, I will try with shift 1 etc.

With panels over eachother I guess I was wrong. I dont mean panels, I mean like direction "panel" and height "panel". So when I press on the "panel" thats shows wich direction I am going i seems like another "panel" is showing under the one I pressed.

Sorry but I dont know the word for the "panels" I mean.

/Fredrik

Title: Problems with class 2 aircrafts
Post by: EHM-0933 Richard on May 09, 2004, 05:59:27 pm

Hi Fredrik,

I also have this problem when running class 2 aircraft on FS2004 which is really annoying, especially as some buttons have no obvious markings. This means I will have to do all my class 2 flights in class 1 aircraft! :@

Rich