EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Ask EuroHarmony => Topic started by: EHM-1745 Ferry on March 17, 2006, 10:21:07 pm

Title: Request training
Post by: EHM-1745 Ferry on March 17, 2006, 10:21:07 pm

Hi,

After some years now, i want to make the step to the virtual world (ivao), so i want to request a training for first time online, but when i log in i get the following message:

Your password and/or pilot ID is incorrect. Please try again...

I use the same password and id as i use to login to the site:%

Is there something i am doing wrong?

Best regards and hope to see you all in the virtual skies,

Ferry

Title: Request training
Post by: EHM-1703 Philip on March 17, 2006, 11:33:55 pm

Hi Ferry,

You should have 2 passwords, one for the "Website" and one for the "Network" (IVAN) Make sure you are using the right passwords to log in to the different areas. (Ie. When connecting via IvAp or IvAe use the Network password, when connecting to the Website use the other!)

Hope that helps a bit, let us know if this doesn't cure your problem.

Title: Request training
Post by: EHM-0001 Gergely on March 18, 2006, 11:26:51 am

Hi

http://ivao.aero/members/person/password.htm

Gergely

Title: Request training
Post by: EHM-1745 Ferry on March 18, 2006, 01:33:17 pm

Hi,

Ok, i fill in my pilotid eh-1745, and than the password from ivao?

Title: Request training
Post by: EHM-1651 Christian on March 18, 2006, 01:49:55 pm

Is it the ehm traing request you can't use??
If you need training you can also send an mail to
Murray, he is the Online Flying coordinator

Title: Request training
Post by: EHM-1745 Ferry on March 18, 2006, 02:54:50 pm

Hi,

Yes its the requestpage from the site, i tried all the passwords but no result.
Maybe i request it by e-mail to murray.

Thanks,

Ferry

Title: Request training
Post by: EHM-1703 Philip on March 18, 2006, 03:26:23 pm

Ah sorry Ferry, I thought you were doing the IVAO training.... I have completely missunderstood you.

The EHM training should just be your ehm id: 1745
and the password should  be your EHM password.

Sorry about that, I was all confused. :%

Title: Request training
Post by: EHM-1745 Ferry on March 18, 2006, 07:21:24 pm

Hi,

Ok, no problem, i wasnt clear enough i think:s.
But if i use the pilot id and the password wich i use to log into the site, it's not working.

Best regards,

Title: Request training
Post by: EHM-1703 Philip on March 18, 2006, 11:40:30 pm

hmmmm. One for the Management to answer then, sorry!