EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Ask EuroHarmony => Topic started by: EHM-1821 Javier on April 16, 2006, 06:07:25 am
-
could someone help me?
the GPS unit on my b1900D is lost.pressing "shift+3"is no use.instead,i think that the throttle control appeared.i am using the panel by Matt Laurita.
pls help.
regards and thanks;D
-
Hi there Javier,
Sometimes I've found that in planes, there aren't as many 'pop-up' windows. Have you tried Shift+2? For me, that's worked with some of the smaller aircraft where the engine qudrant has appeared instead of GPS. Can't say I've used the EuroHarmony B1900D much, though.
Sorry if you've already tried that and it doesn't work, I'm just guessing! Hope it works, let me know. :>
-
no,it didnt work.nothing showed up.:[
-
Hm...
A stupid question: there isn't a button on the panel that you can push so that the GPS will display?
A stupid suggestion: try pushing Shift+[number] from 1 - 9.
-
did it too.no luck.
also,i didnt pay attention to those buttons.maybe i missed it.i'll go check it right now.
-
Yeah, that might work. There will be a little square button with a satellite dish on it (just in case you don't know what it looks like)
-
just tried it.i pressed a dozen times but the GPS just would'nt appear?!
-
Maybe it's a problem with the panel itself. If there's another panel for the plane that you can download, I suggest that you do that. Unless, of course, someone smarter than I comes along and gives you some more ideas. Sorry I couldn't help :[
-
its ok,thanks! i dont fly it too often though.now that i am busy with the pp event.
hopefully,you could start the event with that plane in JFK.;D
Regards
-
Yeah, I want to start the event but I can't lock the plane in ProPilot because it isn't filed with a destination!
-
Javier, open up the panel.cfg file, in notepad. (Located in FS9/Aircraft/ehm_b19/panel/panel.cfg).
Find the section called [Window Titles].
It should be like this:
[Window Titles]
Window00=Main
Window01=GPS
If you don't have a line saying GPS, then there will be no GPS on the panel. If there isn't, then BACKUP the file first, then add under [Window Titles] a line that says
WindowXX=GPS
Where XX is the next number in the sequence.
Then lower down, below the last [Window YY] and all the gauge lines underneath that, leave a line and then insert the following text:
[WindowXX]
size_mm=456,378
window_size=0.5
position=8
BACKGROUND_COLOR=0,0,0
VISIBLE=0
ident=GPS_PANEL
gauge00=fs9gps!gps_500, 0,0
and then leave another line. Once again, XX is the next number in the sequence. Save the file, load up FS and the aircraft and press Shift+the number after XX, and your GPS should pop up!
Good luck - if it doesn't work, please ask or revert back to the backup file.
-
i made those changes but it still wouldnt appear.when i pressed to the outside view not using full screen,i saw that the GPS window was there but it was just blank.and in the cfg file,i found that the panel was actually the one made by Marcello Lugari.has this happened to anyone before?:%
-
hi Javier !
You should try another airplane, another panel. It is possible that your GPS gauge file is damaged somehow.
-
Could you mail me a copy of the panel.cfg file Javier - I can check it out for you if you want. Adress is
iainbutler [at] gmail.com
-
i have sent the cfg file