EuroHarmony Community Forums

Archive => Other Topics => Old Forum => Flight Simulation => Topic started by: EHM-1838 Andrew on April 22, 2006, 07:29:21 pm

Title: Auto throttle problems (Ken Mitchel Panel)
Post by: EHM-1838 Andrew on April 22, 2006, 07:29:21 pm

Good evening all
I don't no if anybody has experienced this but if find when i take off and start to climb in the 320 i have autopilot set but not armed and likewise the auto throttle, when i have retracted undercarriage and flaps i then select speed(usually set for 250kts),but often nothing happens ie the autothrottle should take over but doesn't and its only after fiddling about that i can get it to engage.Any thoughts?this is the Ken Mitchel panel witch otherwise is fine and is rather good too.
Cheers Andy

Title: Auto throttle problems (Ken Mitchel Panel)
Post by: EHM-1570 Bruce on April 22, 2006, 08:01:10 pm

Hi Andy.
  I have found that you have to ensure that the speed button is NOT selected and the Auto throttle is not selected, I then set the required speed in the window and set the Auto throttle, then when you require the Auto throttle to take over press the speed button, and it should work every time. Hope this helps.

Title: Auto throttle problems (Ken Mitchel Panel)
Post by: EHM-1838 Andrew on April 22, 2006, 08:05:55 pm

Ah Ha!
Thanks Bruce i will give that a try.
Cheers and thanks
Andy

Title: Auto throttle problems (Ken Mitchel Panel)
Post by: EHM-1910 Thomas on July 11, 2006, 10:25:52 am

i have a similar probolem in the dornier. the auto throtle engages but when i start to climb the throtles stay at cruise speed.