EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1570 Bruce on July 10, 2006, 04:34:51 pm
-
I flew the EMB 120 yesterday, and I found that the view from the cockpit when on the approach was not very good, I had to use Shift+return twice to be able to see the runway, the problem with doing this is that when you touch down you are looking at the runway a few feet in front of the aircraft. this problem can be overcome by adding the following 2 lines to the panel.cfg file of the beech_king_air_350, as this is the panel used by the EMB 120
[Views]
VIEW_FORWARD_DIR= 3.0, 0.0, 0.0