EuroHarmony Community Forums
Archive => Other Topics => Old Forum => Screenshots Forum => Topic started by: EHM-1358 Tim on July 11, 2006, 01:34:40 pm
-
Overshooting at LOWI! :P
It was all going so well...
(http://img142.imageshack.us/img142/583/yafss0236hh.jpg)
Should have landed by now!
(http://img101.imageshack.us/img101/9828/yafss0245px.jpg)
Uh oh!
(http://img101.imageshack.us/img101/4945/yafss0260ud.jpg)
*Runs for the hills*
-
ok ok so the camera never lies....
N1 on left engine was stuck at 75% while the other was in reverse mode, was at 12kts when i over ran.....but it kept on rolling and rolling and rolling
-
Seeing your angle of attack in the 2nd screenshot I wonder what your airspeed was?! :D
-
Nice proof Tim;D
-
about 120-125kts, but i was a little high so i gave it a bit of nose down to land...
i landed a bit late, but the fact one engine was pushing me forward was the deciding factor...you should be telling me how brilliant i did to land without any virtual casualties!
and for the record, a few days back Tim had a similar incident, after a very long finals leg, we are even now tim...1-1 lol!! I kept it quiet lol, but Tim has took it a step too far!! ;D;D
(http://img218.imageshack.us/img218/912/fsscr3032us.jpg)
wooops! ( he was still rolling at this stage! right main gear is still off the ground slightly)
-
But thats how far I over shot, you were all the way into China!
-
no no no....you were still rolling;D
Lets face it we're both crap pilots!!;D
-
Originally posted by Razza
no no no....you were still rolling;D
Lets face it we're both crap pilots!!;D
I'll agree we were both crap pilots, but I was not rolling out from my landing, the only movement was from the turn back onto the taxiway!
-
:P lol...of course..
-
I suggest you both go back to FO and learn to handle the Beechcraft 1900D first.
-
...wilco..!;D
-
Originally posted by Maarten
I suggest you both go back to FO and learn to handle the Beechcraft 1900D first.
These were both tricky airports.