EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1909 Chris on July 12, 2006, 06:15:13 pm

Title: 3 Problems - Q2
Post by: EHM-1909 Chris on July 12, 2006, 06:15:13 pm

Ok, my second problem is this:

The EH Airbus A330-300 installation went ahead without a hitch, however, when I select the aircraft from the menu and click ok I get this message:

"Flight Simulator was unable to load some aircraft or software. You can continue using Flight Simulator but this aircraft or software will be disabled.

File: GAUGES\A330.GAU"

FS then stops responding after displaying the message. I get the same with the Dassault Falcon and I think one or two others.

I tried removing the offending file and replacing it with a renamed .GAU file from the standard FS 737-400 and it loads the aircraft without a problem, however the aircraft then only has one gauge working and the others are dark.

Any ideas??

Thank you.5

Title: 3 Problems - Q2
Post by: EHM-1703 Philip on July 12, 2006, 06:58:37 pm

Hi Chris,

There is an old post about a similar problem, have a read through this and see if they help.

http://www.fly-euroharmony.com/forum/viewthread.php?tid=2159

Title: 3 Problems - Q2
Post by: EHM-1909 Chris on July 12, 2006, 10:04:29 pm

Thanks Phil, I'll have a look at it.

Title: 3 Problems - Q2
Post by: EHM-1909 Chris on July 12, 2006, 10:46:00 pm

Unfortunately I'm still having no luck here. I've followed all of the instructions on the posts you gave me the link for and although I don't get the error message on selecting the 330 now I don't have any gauges in the panel. Any other ideas?

Title: 3 Problems - Q2
Post by: EHM-1703 Philip on July 13, 2006, 12:41:38 am

OK, one solution in this post was to register FSUIPC, I know thats a cost option, (but there are a lot of other reasons for registering FSUIPC) here is the thread:

http://www.fly-euroharmony.com/forum/viewthread.php?tid=1893

Sorry thats the only other answer I can help you with.

Good luck mate.

Title: 3 Problems - Q2
Post by: EHM-1909 Chris on July 13, 2006, 05:38:41 pm

Thanks Phil, I'll look into it. I have managed to get another panel working with the A330, but there were some .gau files that weren.t working. I got fed up and just deleted them and it seems to be working fine so far. Haven't had a proper flight though so will wait and see. Thanks for your help!