EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => EuroHarmony Main Forum => Topic started by: EHM-1908 Steve on July 14, 2006, 11:41:45 am

Title: Question of Missions
Post by: EHM-1908 Steve on July 14, 2006, 11:41:45 am

When flying missions you have  cat3  to cat7 does this mean that you need to be able to fly cat 7 flights in order to complete all the missions on the page so that you can collect your mission badge.
In other words are pilots below cat 7 unable to complete all missions

Title: Question of Missions
Post by: EHM-1671 Ben on July 14, 2006, 12:17:01 pm

Hi Steve, as far as I know you are right. I think you need to be Class 7 before you can complete all of the missions.

Title: Question of Missions
Post by: EHM-0641 Rico on July 15, 2006, 12:16:20 pm

Quoted from the EHM Operations Manual:

Quote

8.1 Missions
We offer you the opportunity to fly special non-scheduled flights for EuroHarmony or for the divisions. There are pre-defined ones on the Division pages - you can fly these if you have a rank that is permitted to fly the airplane assigned for that flight. Report it using the pirep, with the flight number that appears on the mission page. Note that you may complete every mission pack only once!

Blue Skies & happy Landings,

Title: Question of Missions
Post by: EHM-1908 Steve on July 15, 2006, 12:53:54 pm

Yes i read that but it does not answer my original question

"When flying missions you have cat3 to cat7 does this mean that you need to be able to fly cat 7 flights in order to complete all missions on the page so that you can collect your mission badge.

Title: Question of Missions
Post by: EHM-0361 Karsten on July 15, 2006, 01:05:48 pm

I short YES. You need to be ATP to complet the missions and get the badges

Title: Question of Missions
Post by: EHM-0641 Rico on July 15, 2006, 01:06:03 pm

It does answer your question :P

Quote

8.1 Missions
We offer you the opportunity to fly special non-scheduled flights for EuroHarmony or for the divisions. There are pre-defined ones on the Division pages - you can fly these if you have a rank that is permitted to fly the airplane assigned for that flight. Report it using the pirep, with the flight number that appears on the mission page. Note that you may complete every mission pack only once!

so if your not ATp f.e. then you wont be able to fly a mission that requires the use of a cat7 plane...

Title: Question of Missions
Post by: EHM-1908 Steve on July 15, 2006, 01:14:02 pm

I  think i  understand now but the way it reads on the mission pages would seem to suggest that a class 3 pilot could fly the class 3 missions and recieve the mission badge.
When in fact you are saying that all the missions need to be flown on the page which means you need to be class 7 to attain the mission badge

Title: Question of Missions
Post by: EHM-0641 Rico on July 15, 2006, 01:20:44 pm

Yes Steve, you got it right now... :)

But while flying the Mission, starting at the first flight, byt the time you get closer to the end, you will have enough hours accumulated that will make you ATP ;)

Title: Question of Missions
Post by: EHM-1908 Steve on July 15, 2006, 01:23:06 pm

Thanks Rico
;D