EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1982 Carlos on October 24, 2006, 07:02:27 am

Title: EHM ATR 42
Post by: EHM-1982 Carlos on October 24, 2006, 07:02:27 am

Since I've just been promoted to TC, I downloaded the ATR 42  and in the attempt to do a Class 2 flight, I saw that some of the gauges don't work correctly, f.e. the knobs don't give the right indications and some are bigger than they sould. Has anyone experienced or worked arroung this?

Title: EHM ATR 42
Post by: EHM-1465 Dominic on October 24, 2006, 11:11:44 am

Carlos,

Have a look at this thread for the answer - you have to scroll down a fair way to one of my posts but it gives instructions on a file to download and how to install it...

http://www.fly-euroharmony.com/forum/viewthread.php?tid=2614&page=1

Good luck!

Title: EHM ATR 42
Post by: EHM-1982 Carlos on October 24, 2006, 12:14:46 pm

This is what I need, thanks a lot. I should have read the forum before asking a question, sorry for that.

Title: EHM ATR 42
Post by: EHM-1465 Dominic on October 24, 2006, 12:19:07 pm

Not a problem Carlos but anytime you have a problem there's a fair chance that someone else has been in the same position so it's always worth searching the Forum first ;)

Happy to help!

Title: EHM ATR 42
Post by: EHM-1883 Matt on October 24, 2006, 04:49:37 pm

I knew I was, before Dom came and sorted it out! I was EHM-E4S, so you could see me complain all that time!;)