EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1921 Ivan on October 27, 2006, 08:21:00 pm

Title: Airbus A330 problem
Post by: EHM-1921 Ivan on October 27, 2006, 08:21:00 pm

Whenever I start with the a330, I start with a crash. The front wheel sinks... Don't know how to fix it... Can anyone help?

Title: Airbus A330 problem
Post by: EHM-1651 Christian on October 27, 2006, 09:01:53 pm

mmm, try reinstalling it??

Title: Airbus A330 problem
Post by: EHM-1921 Ivan on October 27, 2006, 09:59:19 pm

I reinstalled it 3 times and still the front wheel sinks...

Title: Airbus A330 problem
Post by: EHM-1633 José on October 27, 2006, 10:37:29 pm

ummm, that happened to me as well with the old Fokker 70, and the B-738 V2.:!

Title: Airbus A330 problem
Post by: EHM-1798 Conrad on October 27, 2006, 10:38:54 pm

Does it happen at all airports? or just one or two?

Title: Airbus A330 problem
Post by: EHM-1921 Ivan on October 27, 2006, 10:48:56 pm

Hm... I haven't tried it yet on other airports... Usually when I take a plane for the first time I take a short flight between Varna and Burgas...
But the strange thing is that after it crashes 1 time, it restarts and it is normal..

Title: Airbus A330 problem
Post by: EHM-1633 José on October 27, 2006, 11:17:57 pm

To me, this has happened anywhere. But it only happens the first time you load the flight.:%

Title: Airbus A330 problem
Post by: EHM-1821 Javier on October 28, 2006, 05:53:59 am

Hi,

I had the same problem before but i figured it out yesterday.;D

in the A330 CFG file, you can scroll down to the [contact points] section, there are 2 sets, one is used only.

below that set, there is another bigger set of points with "//" in front of it.

put "//" on the first set and remove the "//" from the second set, that way, the front gear would be stronger as i tested in my FS.

I tested it at my home airport WSSS, as my scenery for WSSS is quite complex, when i change from cockpit/VC to Tower or Spot view, the plane "jumps" and "bumps" for a good long 30 seconds.

Before i editted the CFG, the plane, as you all have, crash on the start. But now the gear holds out fine;D

Title: Airbus A330 problem
Post by: EHM-1001 Robert on October 28, 2006, 08:22:48 pm

Wow, at least I have a clue too, how to fix that, because I never had that error, but will remove the bug from the plane.