EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Ask EuroHarmony => Topic started by: EHM-1980 Brian on November 22, 2006, 11:06:09 pm
-
just a quick question: i recently loaded the euroharmony al into fs9 and its great to see the euroharmony fleet nearly everywhere i go but there is one problem - at certain large airports like Schiphol or Heathrow all the euroharmony al parked at the gates are literally parked in the terminal building?? no other airline but euroharmony has this problem?? does anyone know of a fix? :s
-
Hmm, it seems like your AFCAD does not match your scenery, if its not then, then i dont know what it is
-
is there an easy fix for that? ;)
-
Brian,
You need to download scenery with a compatible AF2 file from one of the major flightsim sites like Avsim.com or flightsim.com - the scenery needs to match the AF2 (or AFCAD) file as this is what tells FS9 where to draw taxiways etc and where the AI aircraft taxi to and from. So if they don't match the aircraft 'park' in buildings etc.
If you're unsure how it all works there are lots of good tutorials available - try this one to start with:
http://flyawaysimulation.com/contentid-28.html
-
thats great Dominic thanks for the info...... ;D
-
Just found another useful guide to addons and not just scenery either - have a look:-
http://www.flightsimulatorguide.com/addons.htm
-
just had a quick look through that link Dominic and it looks very handy especially for those of us ( especially me! ) that find it difficult to add-on anything else besides new aircraft... ;D so thanks mate!
-
Brian
You could try project Afcad(not sure of address but google it)there you can get all sorts of replacement afcads to try(its very easy to install them)I had similar problems with Traffic 2005 and planes parked in buildings(not Euroharmony though).....LPPT was another bad one for me,but since i ve tried different AFCADS i seem to have eliminated this problem.
-
i'll have a look Andrew and see if i can find it using google - thanks for the tip.... ;D
-
http://afcad.projectai.com/
Here the link Brian.But google should get it.
cheers Andy
-
cheers Andy ;D