EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1695 Hélio on October 29, 2007, 06:16:30 pm
-
I don’t know why, but since yesterday FS9 doesn’t want to start on my computer… I didn’t anything new to the computer. No installations, I didn’t deleted anything…
Until this morning I had a message saying that the computer was out of memory, probably my hard drive was full, but I checked and I had more than 3g available.
So I decided to uninstall and then reinstall FS9… Well, right know when I start FS9 the program shows the first screen and then… ups, the screen vanish and nothing happens… I retry, and the same thing happens again!
Any idea?
-
Hello Helio,
from my experience I can offer the following advice:
1) Make sure you have the latest DirectX from M$
2) Remove Active Camera
3) When doing the un- and re-installation make sure you delete ALL the contents of the fs9/Modules folder.
In my experience it was always a crooked module that did the dirty on my installation.
Everyone else is welcome to contribute with their proposals
-
I'll try that, the third option particulary... Thanks Sotiris!
-
Originally posted by EHM-1695 Hélio
I'll try that, the third option particulary... Thanks Sotiris!
Yes, but if you had the FS9 upgrade to 9.1, then you had to uninstall that first. If did have it, then a new installation of FS9 will still give problems, unless you remove anything and everything related to FS9.1
Hope this helps.
Henk.
-
Nice one Henk, I forgot to mention this.
Cheers
-
Problem solved... I think Sotiris idea worked fine!
And thanks for the hint Henk... I'm glad that i don't have the update, cause i only saw your message five minutes a go!;D