EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-2095 Billy on December 14, 2007, 12:38:38 am
-
Hi, pilots....
I have a serious problem with my sceneries.
I installed the LPPT and LEMD sceneries, i activated them,but i can' t see the runways. Instead of them, i see only grass. And i noticed that all the airports in the iberian area have the same problem, even the default ones. I uninstall the sceneries, but the problem still remains. Any suggestion, please?
Thank you,
Billy Moschogiannis
-
Hi Billy, which sceneries are you using?
-
At the beggining, i used the Simwing' s LEMD, but seeing all this mess, i thought i did something wrong. So, i installed LPPT and LEMD freeware sceneries. But, same problem, no runways all over the iberian area!
-
And here is the problem...... LPPT.
(http://img45.imageshack.us/img45/6946/fs92007121412364037jl5.th.jpg) (http://img45.imageshack.us/my.php?image=fs92007121412364037jl5.jpg)
-
Looks like some sort of elevation problem, what MESH are you using? Also what have you set your TERRAIN_MAX_VERTEX_LEVEL too? If you have it higher than 21, it could be a cause of this malfunction.
-
I don't use any mesh. For the TERRAIN_MAX_VERTEX_LEVEL, i think , i should change it, but i didn't......I'' try to change it.
Edit---> Well, it's 19.
And here are 3 more photos from LEMD.
(http://img517.imageshack.us/img517/7748/fs92007121414492328kj2.th.jpg) (http://img517.imageshack.us/my.php?image=fs92007121414492328kj2.jpg)
(http://img517.imageshack.us/img517/1792/fs92007121414413020sl3.th.jpg) (http://img517.imageshack.us/my.php?image=fs92007121414413020sl3.jpg)
(http://img212.imageshack.us/img212/7808/fs92007121415535245vz0.th.jpg) (http://img212.imageshack.us/my.php?image=fs92007121415535245vz0.jpg)
-
Well, I'll be, that is strange then, can you post your fs9.cfg here so I can have a look at it please?
-
From the first picture I thought you might simply have missing textures, but in that case, at least blank polygons should be visible... for that mesh bug I cant say anything. Very weird.
As I know (or maybe guess only) the elevation of the airport does not extrude the whole region to that level. I thought, if it is coded as 100 ft, and I edit the AFCAD file to be at 500, I simply got a flying airport...but I think the mesh will not be changed to that data. Or not, and this is the problem ? Mayb the AFCAD file is buggy ? did not you downloaded and installed a set of AFCAD files ?
-
here it is
[PANELS]
IMAGE_QUALITY=1
UNITS_OF_MEASURE=1
QUICKTIPS=0
PANEL_MASKING=1
PANEL_STRETCHING=1
[Weather]
WindshieldPrecipitationEffects=1
MinGustTime=10
MaxGustTime=500
MinGustRampSpeed=1
MaxGustRampSpeed=200
MinVarTime=5
MaxVarTime=50
MinVarRampSpeed=10
MaxVarRampSpeed=75
TurbulenceScale=1.000000
DefaultVisibility=0
DynWx_MedianDewPointSpread=10.000000
DynWx_ProbCloudFormForMedianDewPoint=0.000500
DynWx_MaxDewPointSpread=50.000000
DynWx_ProbCloudFormForMaxDewPoint=0.000125
DynWx_ProbCloudFormForMinDewPoint=0.100000
DynWx_DryTempLapsePer1000Meters=9.000000
DynWx_ProbCloudFormForDryTempLapse=0.000500
DynWx_MoistTempLapsePer1000Meters=3.300000
DynWx_ProbCloudFormForMoistTempLapse=0.040000
DynWx_MaxProbCloudChangePerMinute=0.040000
DynWx_MultiplierForDynamicWeatherLevelMild=0.500000
DynWx_MultiplierForDynamicWeatherLevelNormal=1.000000
DynWx_MultiplierForDynamicWeatherLevelHigh=3.000000
DynWx_MultiplierForDynamicWeatherLevelExtreme=10.000000
DynWx_TempChangePercentageForOvercastClouds=0.750000
DynWx_TempChangePercentageForMinDewPoint=0.700000
DynWx_MaxTempChangePerMinute=0.060000
WeatherServerAddress=fs2k.zone.com
WeatherServerPort=80
WeatherGraphDataInDialog=0
DynamicWeather=2
LOADWEATHER=1
MAX_UNLIMITED_VIS=177027
CLOUD_DRAW_DISTANCE=6
3D_CLOUD_PERCENT=100
DETAILED_CLOUDS=1
CLOUD_COVERAGE_DENSITY=8
CloudsImpostorRingRadius=96000.000000
[INTERNATIONAL]
ASLAT=2
ASLON=0
MEASURE=1
[MISC]
COM_RATE=7
LOG_TIME=1
FOREIGN_TRANSLATOR=0
LOG_FILE=LOGBOOK
[STARTUP]
DEMO=0
LOADSIM=1
LOADWINDOW=1
SHOW_OPENING_SCREEN=1
STARTUP_DEMO=
[GRAPHICS]
FULL_SCREEN=0
PERFORMANCE_MODE=0
DEF_PERF_MODE=6
TEXT_SCROLL=1
AUTO_LOD=0
DETAIL_TEXTURE=2
WATER_EFFECTS=1
TERRAIN_USE_VECTOR_MAP=1
TERRAIN_USE_VECTOR_OBJECTS=1
EFFECTS_QUALITY=2
GROUND_SHADOWS=0
SMOOTH_VIEW=1
IMAGE_SMOOTHING=1
TEXTURE_MAX_LOAD=512
COCKPIT_HIGH_LOD=1
AIRCRAFT_SHADOWS=1
LANDING_LIGHTS=1
IMAGE_QUALITY=0
TEXTURE_BLDG=1
TEXTURE_GND=1
TEXTURE_WATER=1
AIRCRAFT_TEXTURE=2
SEE_SELF=1
TEXTURE_QUALITY=3
LOD_TARGET_FPS=17
NUM_LIGHTS=8
[REALISM]
INDASPD=0
PFactor=1.000000
Torque=1.000000
GyroEffect=1.000000
CrashTolerance=1.000000
General=1.000000
UnlimitedFuel=False
TrueAirspeed=False
AutoCoord=True
RealMixture=True
StressDamage=False
GEffect=True
ManualLights=True
GyroDrift=False
CrashWithDyn=False
CrashDetection=0
[CONTROLS]
KBDAIL=64
KBDELEV=64
KBDRUD=64
PAN_RATE=400
[USERINTERFACE]
MAP_ORIENTATION=2
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
PageID=4
OpenATCOnCreate=0
SITUATION=J:\Documents and Settings\Billy\My Documents\Flight Simulator Files\1
DisplayFuelAsWeight=1
SelectFlightLevel=0
SelectFlightTitle=2
[SOUND]
SOUND=1
SOUND_FADER1=0.500000
SOUND_FADER2=0.100000
SOUND_FADER3=0.300000
SOUND_FADER4=0.800000
SOUND_FADER5=0.500000
SOUND_FADER6=0.800000
SOUND_QUALITY=2
[DISPLAY.Device.NVIDIA GeForce 8800 GTX.0]
Mode=1680x1050x32
MipBias=8
TriLinear=1
AntiAlias=1
[DISPLAY]
UPPER_FRAMERATE_LIMIT=25
TEXTURE_BANDWIDTH_MULT=40
[TERRAIN]
TERRAIN_ERROR_FACTOR=100.000000
TERRAIN_MIN_DEM_AREA=10.000000
TERRAIN_MAX_DEM_AREA=100.000000
TERRAIN_MAX_VERTEX_LEVEL=19
TERRAIN_TEXTURE_SIZE_EXP=8
TERRAIN_AUTOGEN_DENSITY=4
TERRAIN_USE_GRADIENT_MAP=1
TERRAIN_EXTENDED_TEXTURES=1
TERRAIN_DEFAULT_RADIUS=0.000000
TERRAIN_EXTENDED_RADIUS=0.000000
TERRAIN_EXTENDED_LEVELS=0
[SCENERY]
IMAGE_COMPLEXITY=5
DYNAMIC_SCENERY=1
DYN_SCN_DENSITY=4
DAWN_DUSK_SMOOTHING=1
SUNGLARE=1
LENSFLARE=1
[AIRtoCONTAINER]
SIM1=Cessna Skylane 182R RG
SIM2=Learjet 45
SIM3=Schweizer 2-32 Sailplane
SIM4=Sopwith Camel
SIM5=Extra 300S
SIM6=Boeing 737-400
[APL]
CACHE_WAV_FILES=1
[TrafficManager]
TrafficDensity=54
IFROnly=0
EnableAirline=1
EnableGeneralAviation=1
[AContain]
ShowLabels=1
ShowUserLabel=1
ShowLabelManufacturer=0
ShowLabelModel=0
ShowLabelTailNumber=0
ShowLabelDistance=0
ShowLabelAltitude=0
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=0
ShowLabelFlightPlan=0
ShowLabelContainerId=0
ShowLabelAirspeed=0
ShowLabelHeading=0
LabelDelay=1000
LabelColor=FFFF0000
[SLEW]
MaxLateralRate=40000.000000
MaxVerticalRate=1000.000000
MaxPitchRate=360.000000
MaxBankRate=360.000000
MaxHeadingRate=360.000000
[VirtualCopilot]
VirtualCopilotActive=0
[MULTIPLAYER]
ALWAYS_SHOW_INITIAL_DIALOG=1
SESSION_NAME=My Session
PLAYER_NAME=Unnamed Pilot
GUARANTEED_MESSAGES=0
MAX_PLAYERS=8
MAX_OBSERVERS=0
TICKS_PER_SYNC=90
PACKETS_PER_SEC=4
COLLISION_SECS=2
FOLLOWING_MULTIPLIER=5
ALLOW_PLANE_MODEL_SEND=0
ALLOW_PLANE_MODEL_RECEIVE=0
ALLOW_TEXTURE_SEND=0
ALLOW_TEXTURE_RECEIVE=0
MAX_SEGMENT_SIZE=100
MAX_SEGMENTS_PER_SEC=1
CONNECTION_TYPE=0
PROTOCOL_SELECTION=0
ALLOW_DESCRIPTIVE_SEND=1
ALLOW_DESCRIPTIVE_RECEIVE=1
AUTOPILOT_LOCK=0
DISTANCE_DISPLAY=0
ADF_TRACK=0
ALLOW_NAME_TAG_DISPLAY=1
CLIENT_CONNECT_USE_CUSTOM_PORT=0
CLIENT_CONNECT_PORT=23456
CLIENT_HOST_USE_CUSTOM_PORT=0
CLIENT_HOST_PORT=23456
HOST_CONNECT_USE_CUSTOM_PORT=0
HOST_CONNECT_PORT=23456
[SIM]
SYSCLOCK=1
[ATC]
AutoOpenAirTrafficWindow=0
UsePilotVoice=1
ShowATCText=1
PilotVoice=1
[MAIN]
Location=-1,2,1327,1019
HideMenuNormal=0
HideMenuFullscreen=1
Maximized=0
[FACILITIES]
COUNTRY=
STATE=
CITY=
GTL_BUTTON=6225
[FlightPlanMap]
SHOW_AIRPORTS=1
SHOW_VORS=0
SHOW_NDBS=0
SHOW_APPROACHES=1
SHOW_INTERSECTIONS=1
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=1
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=0
SHOW_WEATHERSYSTEMS=0
SHOW_DATATAGS=1
SHOW_TERRAIN=1
show_waypoints=1
show_airways=1
show_markers=1
show_volume_boundaries=1
show_ac_twr=1
[MAPVIEW_MAP]
SHOW_AIRPORTS=1
SHOW_VORS=0
SHOW_NDBS=0
SHOW_APPROACHES=1
SHOW_INTERSECTIONS=0
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=0
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=0
SHOW_WEATHERSYSTEMS=0
SHOW_DATATAGS=1
SHOW_TERRAIN=1
show_flight_history=1
[RWW_WEATHER_MAP]
SHOW_AIRPORTS=0
SHOW_VORS=0
SHOW_NDBS=0
SHOW_APPROACHES=0
SHOW_INTERSECTIONS=0
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=0
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
[FrameCallNoWarn]
Followme=1
[WEATHER_MAP]
SHOW_AIRPORTS=0
SHOW_VORS=0
SHOW_NDBS=0
SHOW_APPROACHES=0
SHOW_INTERSECTIONS=0
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=0
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
[WeatherAreaMap]
show_airports=0
show_waypoints=0
show_airways=1
show_vors=0
show_ndbs=0
show_markers=0
show_volume_boundaries=0
show_ac_twr=1
[JOYSTICK_MAIN {65416E30-90A6-11DC-8001-444553540000}]
AXIS_EVENT_00=AXIS_AILERONS_SET
AXIS_SCALE_00=64
AXIS_NULL_00=36
AXIS_EVENT_01=AXIS_ELEVATOR_SET
AXIS_SCALE_01=64
AXIS_NULL_01=36
AXIS_EVENT_02=AXIS_THROTTLE_SET
AXIS_SCALE_02=127
AXIS_NULL_02=1
AXIS_EVENT_03=AXIS_RUDDER_SET
AXIS_SCALE_03=64
AXIS_NULL_03=36
AXIS_EVENT_05=AXIS_RUDDER_SET
AXIS_SCALE_05=64
AXIS_NULL_05=36
BUTTON_DOWN_EVENT_00=BRAKES
BUTTON_DOWN_REPEAT_00=1
BUTTON_DOWN_EVENT_01=AP_MASTER
BUTTON_DOWN_EVENT_02=FLAPS_DECR
BUTTON_DOWN_EVENT_03=FLAPS_INCR
BUTTON_DOWN_EVENT_04=PARKING_BRAKES
BUTTON_DOWN_EVENT_05=GEAR_TOGGLE
BUTTON_DOWN_EVENT_06=SPOILERS_TOGGLE
BUTTON_DOWN_EVENT_08=VIEW_MODE
BUTTON_DOWN_EVENT_09=GEAR_TOGGLE
POV_MOVE_EVENT_00=PAN_VIEW
POV_MOVE_REPEAT_00=1
[KEYBOARD_MAIN]
SELECT_1=49,8
SELECT_2=50,8
SELECT_3=51,8
SELECT_4=52,8
MINUS=189,8
PLUS=187,8
ZOOM_1X=8,8
SOUND_TOGGLE=81,8
SIM_RATE=82,8
XPNDR=84,8
SLEW_TOGGLE=89,8
EGT=85,8
SMOKE_TOGGLE=73,8
STROBES_TOGGLE=79,8
PAUSE_TOGGLE=80,8
ATC=192,8
ADF=65,8
VIEW_MODE=83,8
HEADING_GYRO_SET=68,8
DME=70,8
GEAR_TOGGLE=71,8
ANTI_ICE_TOGGLE=72,8
JET_STARTER=74,8
JOYSTICK_CALIBRATE=75,10
ALL_LIGHTS_TOGGLE=76,8
SITUATION_SAVE=186,8
VIEW_WINDOW_TO_FRONT=222,8
AP_MASTER=90,8
FREQUENCY_SWAP=88,8
COM_RADIO=67,8
VOR_OBS=86,8
BAROMETRIC=66,8
NAV_RADIO=78,8
MAGNETO=77,8
BRAKES=190,8
SPOILERS_TOGGLE=191,8
SITUATION_RESET=186,10
FLAPS_UP=116,8
THROTTLE_FULL=115,8
THROTTLE_INCR_SMALL=114,8
THROTTLE_DECR=113,8
FLAPS_DOWN=119,8
THROTTLE_CUT=112,8
VIEW=111,8
ELEV_TRIM_DN=36,8
ELEV_DOWN=38,8
INCREASE_THROTTLE=33,8
AILERONS_LEFT=37,8
CENTER_AILER_RUDDER=12,8
AILERONS_RIGHT=39,8
ELEV_TRIM_UP=35,8
ELEV_UP=40,8
DECREASE_THROTTLE=34,8
VIEW_FORWARD=38,41
VIEW_FORWARD_RIGHT=33,41
VIEW_RIGHT=39,41
VIEW_REAR_RIGHT=34,41
VIEW_REAR=40,41
VIEW_REAR_LEFT=35,41
VIEW_LEFT=37,41
VIEW_FORWARD_LEFT=36,41
VIEW_DOWN=12,41
RUDDER_LEFT=45,8
RUDDER_RIGHT=135,8
BRAKES_LEFT=122,8
BRAKES_RIGHT=123,8
AP_ATT_HOLD=84,10
AP_LOC_HOLD=79,10
AP_APR_HOLD=65,10
AP_HDG_HOLD=72,10
AP_ALT_HOLD=90,10
AP_WING_LEVELER=86,10
AP_BC_HOLD=66,10
AP_NAV1_HOLD=78,10
EXIT=67,10
ABORT=3,10
READOUTS_FLIGHT=90,9
PANEL_TOGGLE=219,9
VIEW_MODE_REV=83,9
PANEL_LIGHTS_TOGGLE=76,9
LANDING_LIGHTS_TOGGLE=76,10
PARKING_BRAKES=190,10
MINUS_SHIFT=189,9
PLUS_SHIFT=187,9
FLAPS_INCR=118,8
FLAPS_DECR=117,8
PROP_PITCH_LO=115,10
PROP_PITCH_INCR_SMALL=114,10
PROP_PITCH_DECR=113,10
PROP_PITCH_HI=112,10
MIXTURE_RICH=115,11
MIXTURE_INCR_SMALL=114,11
MIXTURE_DECR=113,11
MIXTURE_LEAN=112,11
SCRIPT_EVENT_1=219,10
SCRIPT_EVENT_2=221,10
YAW_DAMPER_TOGGLE=68,10
CENTER_NT361_CHECK=57,11
CLOSE_VIEW=221,8
NEW_VIEW=219,8
NEW_MAP=221,9
NEXT_VIEW=9,10
PREV_VIEW=9,11
VIEW_TYPE=83,10
VIEW_TYPE_REV=83,11
RADIO_VOR1_IDENT_TOGGLE=49,10
RADIO_VOR2_IDENT_TOGGLE=50,10
RADIO_DME1_IDENT_TOGGLE=52,10
RADIO_ADF_IDENT_TOGGLE=53,10
GEAR_PUMP=71,10
SPOILERS_ARM_TOGGLE=191,9
PITOT_HEAT_TOGGLE=72,9
AP_AIRSPEED_HOLD=82,10
AUTO_THROTTLE_ARM=82,9
AUTO_THROTTLE_TO_GA=71,11
LANDING_LIGHT_UP=38,11
LANDING_LIGHT_DOWN=40,11
LANDING_LIGHT_LEFT=37,11
LANDING_LIGHT_RIGHT=39,11
LANDING_LIGHT_HOME=12,11
PAN_RESET=46,9
KNEEBOARD_VIEW=121,8
MP_PLAYER_CYCLE=84,11
MP_PLAYER_SNAP=70,11
MP_GO_OBSERVER=79,11
MP_CHAT=221,11
MP_ACTIVATE_CHAT=13,8
PANEL_1=49,9
PANEL_2=50,9
PANEL_3=51,9
PANEL_4=52,9
PANEL_5=53,9
PANEL_6=54,9
PANEL_7=55,9
PANEL_8=56,9
PANEL_9=57,9
AP_MACH_HOLD=77,10
VIEW_FORWARD_UP=38,42
VIEW_FORWARD_RIGHT_UP=33,42
VIEW_REAR_RIGHT_UP=34,42
VIEW_REAR_UP=40,42
VIEW_REAR_LEFT_UP=35,42
VIEW_FORWARD_LEFT_UP=36,42
VIEW_UP=12,42
INVOKE_HELP=191,10
TOGGLE_AIRCRAFT_LABELS=76,11
INC_COWL_FLAPS=86,11
DEC_COWL_FLAPS=67,11
USER_INTERRUPT=27,8
AILERON_TRIM_LEFT=37,10
AILERON_TRIM_RIGHT=39,10
RUDDER_TRIM_LEFT=45,10
RUDDER_TRIM_RIGHT=135,10
TOGGLE_FLIGHT_DIRECTOR=70,10
DECREASE_CONCORDE_NOSE_VISOR=87,8
TOGGLE_AFTERBURNER=115,9
TOGGLE_MASTER_BATTERY_ALTERNATOR=77,9
INCREASE_CONCORDE_NOSE_VISOR_FULLY=69,8
SNAP_TO_PANEL=45,41
MARKER_SOUND_TOGGLE=51,10
TOGGLE_WATER_RUDDER=87,9
TOGGLE_PUSHBACK=80,9
KEY_CHASE_VIEW_NEXT=87,10
KEY_CHASE_VIEW_PREV=87,11
HEADING_BUG_SELECT=72,11
ALTITUDE_BUG_SELECT=90,11
CHASE_VIEW_TOGGLE=81,10
EYEPOINT_UP=13,9
EYEPOINT_DOWN=8,9
EYEPOINT_RIGHT=13,11
EYEPOINT_LEFT=8,11
EYEPOINT_FORWARD=8,10
EYEPOINT_BACK=13,10
EYEPOINT_RESET=32,8
AIRSPEED_BUG_SELECT=82,11
TOGGLE_TAILWHEEL_LOCK=71,9
ROTOR_BRAKE=66,9
ROTOR_CLUTCH_SWITCH_TOGGLE=190,9
ROTOR_GOV_SWITCH_TOGGLE=188,9
VIRTUAL_COPILOT_TOGGLE=88,11
VIRTUAL_COPILOT_ACTION=88,10
[KEYBOARD_SLEW]
SLEW_TOGGLE=89,8
SLEW_ALTIT_UP_FAST=115,8
SLEW_ALTIT_UP_SLOW=114,8
SLEW_ALTIT_FREEZE=113,8
SLEW_ALTIT_DN_FAST=112,8
SLEW_ALTIT_PLUS=81,8
SLEW_ALTIT_MINUS=65,8
SLEW_PITCH_DN_FAST=119,8
SLEW_PITCH_DN_SLOW=118,8
SLEW_PITCH_FREEZE=117,8
SLEW_PITCH_UP_FAST=116,8
SLEW_PITCH_PLUS=57,8
SLEW_PITCH_MINUS=48,8
READOUTS_SLEW=90,9
SLEW_BANK_MINUS=36,8
SLEW_AHEAD_PLUS=38,8
SLEW_BANK_PLUS=33,8
SLEW_LEFT=37,8
SLEW_FREEZE=12,8
SLEW_RIGHT=39,8
SLEW_HEADING_MINUS=35,8
SLEW_AHEAD_MINUS=40,8
SLEW_HEADING_PLUS=34,8
SLEW_RESET=32,8
TOGGLE_AIRCRAFT_LABELS=76,11
EYEPOINT_UP=13,9
EYEPOINT_DOWN=8,9
EYEPOINT_RIGHT=13,11
EYEPOINT_LEFT=8,11
EYEPOINT_FORWARD=8,10
EYEPOINT_BACK=13,10
-
Originally posted by EHM-1001 Robert
From the first picture I thought you might simply have missing textures, but in that case, at least blank polygons should be visible... for that mesh bug I cant say anything. Very weird.
As I know (or maybe guess only) the elevation of the airport does not extrude the whole region to that level. I thought, if it is coded as 100 ft, and I edit the AFCAD file to be at 500, I simply got a flying airport...but I think the mesh will not be changed to that data. Or not, and this is the problem ? Mayb the AFCAD file is buggy ? did not you downloaded and installed a set of AFCAD files ?
AFCAD files?! What is that?
Unfortunately, i don' know much about FS files.
But, we talk about two different sceneries that created problems to the iberian zone all over.
I think that there were some bgl. files to change. I don't know if these 2-3 files can cause all this mess.......
-
AFCAD files describe all the runways, taxiways, navaids, ILS, parking spots, and many invisible objects, around the airports. These are BGL files, but the program that you can edit them with called AFCAD2. These files have usually the name as AF2_xxxx.bgl, where xxxx is the airport ICAO code. Usually these should be placed under Addon Scenery/Scenery folder, so you can simply uninstall them by a deletion.
I do not think this bug have any common with the cfg...I rather think it is a scenery bug and should seek in the scenery related files.
-
The cfg could have caused it if there was a line missing ( happens more than you think ) seems to be alright though, indeed the AFCAD would be next, more complicated step. Did you install them according to the manuals that came with the sceneries?
-
Originally posted by EHM-1657 Jay
The cfg could have caused it if there was a line missing ( happens more than you think ) seems to be alright though, indeed the AFCAD would be next, more complicated step. Did you install them according to the manuals that came with the sceneries?
Yes, i did everything according to the manual. The only problem was that i had to deactivate some bgl's. I did it, but maybe something went wrong..From then, all the scenery was a disaster. Even if i uninstall the sceneries (lemd and lppt) and use the default ones, the problem still remains.....
:s
-
Hmmmm the bgl's that you deactivated, did you back them up? I.o.w. can you restore the situation to how it was before you did that ?
-
Originally posted by EHM-1657 Jay
Hmmmm the bgl's that you deactivated, did you back them up? I.o.w. can you restore the situation to how it was before you did that ?
Well, you see, these bgl's were part of the simwing's LEMD scenery. I deactivated them so as to install the update, according to the manual. Later, i uninstall both of them. So i tried to use the default scenery, but the problem still remains. And not only that; it caused the same problem to all the iberian airports!
-
Well, maybe you could try to uninstall completely that Payware stuff, then look for any possible Iberian airport in the Addon Scenery folder, and uninstall them too. After that, if the problem still remains you could try to reinstall the Scenery package...
Do not worry, not the whole game, only scenery. It is on CD3. You should look for the "Eurw" folder inside Msgame8.cab\Scenery, and unpack that folder to FS2004\Scenery folder. This way you can "reset" the default Western European scenery... if nothing else helps...before reinstalling the whole game.
-
Originally posted by EHM-1001 Robert
Well, maybe you could try to uninstall completely that Payware stuff, then look for any possible Iberian airport in the Addon Scenery folder, and uninstall them too. After that, if the problem still remains you could try to reinstall the Scenery package...
Do not worry, not the whole game, only scenery. It is on CD3. You should look for the "Eurw" folder inside Msgame8.cab\Scenery, and unpack that folder to FS2004\Scenery folder. This way you can "reset" the default Western European scenery... if nothing else helps...before reinstalling the whole game.
I have already done all this before and here is the result:
(http://img265.imageshack.us/img265/5022/fs92007121519190028uo0.th.jpg) (http://img265.imageshack.us/my.php?image=fs92007121519190028uo0.jpg)
This should be LEMD!!
-
Doh... and what happened with other European scenery ? Are those remained, or collapsed ?
That is very weird. I think it would be better to reinstall the whole game, and be more cautious when installing sceneries next time.
-
This has to be some sort of MESH problem somewhere, where is your MESH in your Scenery Library, top or bottom ?
-
Originally posted by EHM-1001 Robert
Doh... and what happened with other European scenery ? Are those remained, or collapsed ?
That is very weird. I think it would be better to reinstall the whole game, and be more cautious when installing sceneries next time.
Well, the other sceneries work fine. Only 4-5 airports in Spain and Portugal have the same problems, all of them near between each other, but all the others are ok.
Originally posted by EHM-1657 Jay
This has to be some sort of MESH problem somewhere, where is your MESH in your Scenery Library, top or bottom ?
Could you be more specific? What mesh?the default one?
Thank all of you for your time...