EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1945 Christophe on June 02, 2008, 01:21:19 pm

Title: Flight Logger - Issue with Class filtering
Post by: EHM-1945 Christophe on June 02, 2008, 01:21:19 pm

Hello all,

May be it was already reported (but doing a quick seach, I've not seen it on the forum), but I've noticed the following issue while using the Flight logger v3.0.9. When filtering the flight list, by removing Cargo, Missions, ... flights, and keeping only Main schedule, and then when willing to keep only Class 5 flight schedule, I've noticed that not only Class 5 flights are displayed but Class 4 as well. I don't think this is the expected result. In addition, I've seen as well, that in the available aircraft list, not only Class 5 are listed, but Class 4 and Class 6 also.

Hope it helps, and sorry if this was already reported ;).

Cheers
Kristoff (EHM1945)

Title: Flight Logger - Issue with Class filtering
Post by: EHM-1671 Ben on June 03, 2008, 05:35:47 am

Hi Christophe, to my knowledge this is what the flight logger is designed to do.

Since class 4, 5 and 6 flights can all be flown with any class 4, 5 or 6 aircraft, the flight logger is showing all of the available routes for these types of aircraft. That is to say, if you want to select an F70 it is showing all of the available routes for the F70, not just the class 4 ones.

Hope this helps :P

Title: Flight Logger - Issue with Class filtering
Post by: EHM-1150 Armando on June 04, 2008, 10:07:15 pm

Hi,

Ben is quite right; that is the intended behaviour of FlightLogger.

Cheers
Armando Chibante

Title: Flight Logger - Issue with Class filtering
Post by: EHM-1945 Christophe on June 06, 2008, 07:46:49 am

Ben, Armando,

Thank you for the clarification and help.

Cheers
Kristoff