EuroHarmony Community Forums

Archive => Other Topics => Old Forum => Flight Simulation => Topic started by: EHM-2131 Bruce on October 23, 2008, 05:58:23 pm

Title: Flogger
Post by: EHM-2131 Bruce on October 23, 2008, 05:58:23 pm

Hello all. After my PC crash  l have been replacing my Flogger with no luck l get the following reports."cannot intialize data bindings" and Runtime error 9, any suggestions to cure this
Regards Bruce T

Title: Flogger
Post by: EHM-0948 Bruno on October 23, 2008, 06:55:02 pm

Hi Bruce,

I think if you search the forum (Technical Discussions) you'll find some actions that you can do to solve that out.

Regards,

Title: Flogger
Post by: EHM-1671 Ben on October 24, 2008, 09:43:37 am

Hi Bruce,

If you're running Windows Vista (which I expect you are), here is the solution for the runtime error 9:

http://www.fly-euroharmony.com/forum/viewthread.php?tid=4013#pid38342

Hope this helps ;)

Title: Flogger
Post by: EHM-2131 Bruce on October 24, 2008, 07:46:14 pm

HI Ben and Bruno l am running MS XP. l have looked at the forum and found some of the files. but l cannot find REGEUR32.exe l have done a search on my computer but cannot find it, thanks for the help Bruce EHM 2131

Title: Flogger
Post by: EHM-2131 Bruce on October 26, 2008, 04:05:19 pm

Hi, have just downloaded the flogger on another computer but still get the same result "no bindings and runtime 9" any more sugestions. missing my pro pilot!!!! regards Bruce 2131

Title: Flogger
Post by: EHM-0948 Bruno on October 26, 2008, 07:12:00 pm

Hi,

Try to search on the internet for that file: the REGEUR32.exe.

Also, if someone has that file and can post a link to it Bruce will thank you.

Regards,

Title: Flogger
Post by: EHM-1001 Robert on October 27, 2008, 07:11:16 pm

Hi folks,

in the original topic it was "regsvr32.exe" Here is my FILE. (http://www.fly-euroharmony.com/robert/regsvr32.exe) It is hot from the Windows\System32 folder. Although it is Hungarian... maybe not the best, you can try it out at least ;)

Title: Flogger
Post by: EHM-1759 Ricardo on October 27, 2008, 07:38:06 pm

Hi Bruce, here you have mine for Windows XP (English Version):

http://web.tagus.ist.utl.pt/~ricardo.placido/regsvr32.rar

Regards

Title: Flogger
Post by: EHM-2131 Bruce on October 27, 2008, 09:02:23 pm

THanks for the help. l am not very good with computers, were do you put the file/ how do l get the windows system32, sorry for being no good with this subject, Regards Bruce EHM 2131

Title: Flogger
Post by: EHM-1001 Robert on October 27, 2008, 09:39:37 pm

Hello Bruce !

If you have Windows XP it is probably installed on your C: drive. Inside the Windows folder there is a system folder called System32, so alltogether the path is probably "C:\Windows\System32" you should copy the regsvr32.exe file there. Then run it as described in the earlier attached thread ;)

Title: Flogger
Post by: EHM-2131 Bruce on October 28, 2008, 12:19:02 pm

Hello Robert Thanks for the info  l have found the file and put the regsvr32 into it but still not working,  regards Bruce 2131

Title: Flogger
Post by: EHM-2131 Bruce on November 06, 2008, 05:01:57 pm

Hello all. thanks for the info have now finally got flogger working again, went back into the forum and re-read them, the reason i could not get it to work was i was using "/" instead of "\"when typing  the DLL:$  l have gone to the bottom of the class!!! see you all on Pro pilot soon     Bruce 2131