EuroHarmony Community Forums
Archive => Other Topics => Old Forum => Screenshots Forum => Topic started by: EHM-0948 Bruno on December 05, 2008, 12:36:57 pm
-
Hi mates,
We were going to help a guy on the TWR exam, but unfortunately we ran there too late ;D
At gates
(http://img67.imageshack.us/img67/4403/parkedey9.jpg)
Rico Taxiing
(http://img181.imageshack.us/img181/9220/taxiingah2.jpg)
The "wall" at my front!
(http://img68.imageshack.us/img68/3920/thewallqo9.jpg)
Rico landing
(http://img181.imageshack.us/img181/5072/ricolanding2vj5.jpg)
Stopped at gates
(http://img218.imageshack.us/img218/8771/destinationvm7.jpg)
-
Cool pics :8 Next flight we'll do were it's alreaady day ;)
-
On the "wall" image, I have something incorrectly configure for take-off ..
Do you guys know what was it ? ;D
-
LOL! no wonder you almost hit the mountain :P
-
HAHAHA! I didn't not because of that. I corrected it before taking off ;)
So... what was it ? It is shown there on the cockpit ;)
-
Well, I normally set the heading to 180 when taking off from TNCM as per the charts. With the setting shown in your presidential plane you were heading for disaster;D
-
... well, a clue. Before even turning, I would had falled. :)
-
Only thing I can think of, because I don't know the plane, are the flaps configuration. I watched a video showing the real takeoff of Martinair MD-11 from EHAM using 25 degrees. Are 15 degrees enough in TNCM?
Other than that, I give up.
-
Correct!
The flaps configuration was incorrect. You can see the word "FLAPS".
If everything was correct for T/O the rectangle should be empty green.
The MD-11 of Martinair used a 25 degree flaps because it was heavy. On mine I used about 18 degrees.
And btw, the MD-11 uses the "DIAL-A-FLAP" feature where you can configure it to use any degree from 15 to 25 :)
-
It seems to be a nice plane. Is that the PMDG version?
I am just switching to a desktop. I will run both FS9 and FSX until I get confident with FSX. I will use Windows XP since I don't like Vista. My son, a computer engineer just assembled it choosing different components.
Last night I was running FS9 in the new one with a 21" monitor and could see what I missed all this time.
I read in PMDG page that the FS9 version will be ready soon. How this compare with the DC-10?. I was very fond of this aircraft.