EuroHarmony Community Forums

Archive => EuroHarmony VA => Old Forum => Technical discussions => Topic started by: EHM-1120 Russ on December 28, 2004, 06:12:33 pm

Title: Antonov
Post by: EHM-1120 Russ on December 28, 2004, 06:12:33 pm

Does anyone know how to turn on the Autopilot (it just goes on and back off with w/o the FD on)?  I am also looking to find the approach and landing speeds as well if anyone knows.

Thanks, Russ
Currently Flying the class 2 route from Sweden into Norway:
2300-2301-2302-2303-2304

Title: Antonov
Post by: EHM-0001 Gergely on January 07, 2005, 08:46:36 am

Did You try pressing Z on the keyboard, or tried to click on the gauge itself?

Title: Antonov
Post by: EHM-1500 Jim on January 07, 2005, 11:42:16 am

Russ, some times you have to alter the aircraft config file to allow the autopilot function, for some reason some planes come with it deselected. Look for a line saying autopilot=   it should be a 1 but sometimes is a 0, in which case change it!! Have a good link for aircraft performance data but on home pc and currently at work, will provide link when i get home, good luck, Jim

Title: Antonov
Post by: EHM-1500 Jim on January 07, 2005, 03:59:12 pm

Russ, home now, try http://ls2.ians.lu/performance/  for performance data.

Title: Antonov
Post by: EHM-1120 Russ on January 08, 2005, 03:13:57 am

Thanks for the posts.  As it turns out it is always important to insure that the disengage bar on your autopilot is in the up position (Go Flight)...:) Thanks for the performance data.